AFM/Performance Flashcards
Approved oils can be found ( ).
in the Addendum section of the AFM under OIL Servicing.
Approved fuels can be found ( ).
in the Addendum section of the AFM under Fuel Servicing.
Part 91 wet landing data is found ( ).
in the Addendum section of the AFM under Contaminated Runway Data.
Factored dry and wet runway landing distance data are found in the ( ).
Performance section of the AFM.
Wet runway takeoff data is found in the ( ).
Performance section of the AFM.
A pilot should add ( ) to the takeoff field length for a rolling takeoff.
300’
AFM 5-45
Demonstrated cross wind limit is ( ).
22 kts.
PTM 18-71
Turbulent air penetration speed is ( ).
250 kts or .73 Mach, whichever is less.
AFM 2-72
What’s the definition of a contaminated runway?
More than 25% of the rwy surface is covered in
1/8” standing water, slush, or snow.
Where is the performance data for contaminated runways found?
Contaminated Runway Addendum in the AFM
First segment climb
From 35’ agl to gear retraction
Second segment climb
From gear retraction to flap retraction (typically 400’ agl)
2.4% climb gradient
Third segment climb
Begins at 400’ or flap retraction
Ends when MCT is set
Fourth segment climb
Begins at MCT
Ends at 1500’ agl
1.2% climb gradient is required
