Networking Tools 2.8

Question 1

Cable Crimper

Answer 1

Used to create new wires by pinching modular ethernet connecotrs onto the cable

Question 2

Cable Stripper

Answer 2

used to expose the bear wires by stripping away coaxial cover on the wire

Question 3

MultiMeter

Answer 3

• Used for check the power source wether it is from an AC Outlet
• also used to check DC Voltage for laptop power supply or PC power supply

Contiunity uses like

• cable connectiivty
• Fuse status
• Wire Mapping

Question 4

Tone Generator

Answer 4

Used to locate wires by letting out a tone audio

Question 5

Cable Tester

Answer 5

used to allow the operators to verify electrical connections between connections

• if wires is properly installed
• all pins are connected

Question 6

LoopBack Plug

Answer 6

loopback plugs is used to send traffic out of a particular inteface loop the signal around and them send back into the same interface used to test physical ports to identify network issues

Question 7

Punch down tool

Answer 7

used to punch down a wire into a block

–66block

–110 block

it can be tedious becuse you have to punch each row individually as you punch it down it also trims the wires

Question 8

Wifi -Analyzer

Answer 8

Allows users to collect information from different acces points and channels within your network and provide a clear over view with visual reports the strength of the Frequncy