Net+ Session 2 Post-lab follow-up Flashcards
Which is true about managed and unmanaged switches?
A - Managed switches can be configured while unmanaged switches cannot
B - Managed switches have a GUI while unmanaged switches are command-line only
C - Managed switches are administered locally while unmanaged switches are administered remotely
D - Managed switches have VLANs that can be tagged and VLANs in unmanaged switches cannot be tagged
A - Managed switches can be configured while unmanaged switches cannot
Which is not part of AAA configuration for switch management? A - Auditing B - Accounting C - Authorization D - Authentication
A - Auditing
Which is true about native VLANs and default VLANs?
A - Native VLANs are tagged and a default VLAN is mandatory
B - Native VLANs are untagged and a default VLAN is mandatory
C - Native VLANs are tagged and a default VLAN is not mandatory
D - Native VLANs are untagged and a default VLAN is not mandatory
B - Native VLANs are untagged and a default VLAN is mandatory
Which is the native VLAN trunking protocol for Cisco? A - VTA B - STA C - VTP D - STP
C - VTP
Which part of switches carries information between two devices with more than one VLAN? A - Tagging B - Trunking C - Port bonding D - Port mirroring
B - Trunking
What would cause flooding if STP fails?
A - A broadcast from a switch to a machine
B - A broadcast from multiple switches to a machine
C - A broadcast from a machine to a single switch port
D - A broadcast from a machine to each gigabit port on a switch
D - A broadcast from a machine to each gigabit port on a switch
What is the overall purpose of port bonding?
A - The port-to-port connection between VLANs
B - The port-to-port connection between routers
C - The port-to-port connection between switches
D - The use of multiple ports to increase performance
D - The use of multiple ports to increase performance
Which protocol is used for remote monitoring of traffic? A - STP B - RSTP C - SPAN D - RSPAN
D - RSPAN
When assigning an IP address to a switch, what else must be assigned? A - Port B - DNS server C - Subnet mask D - Default gateway
C - Subnet mask
All of the switches in a network are using PoE. To make sure all of the switches continue to run in case of a brownout, how many UPS devices are needed? A - 0 B - 1 C - 2 D - 3
B - 1
What is the role of power converters in power management?
A - Step power up
B - Step voltage down
C - Temporarily replace an unstable circuit
D - Keep power going in case of a power outage
B - Step voltage down
What is the first job of a UPS in a network environment?
A - Step power up
B - Step voltage down
C - Temporarily replace an unstable circuit
D - Keep power going temporarily in case of a power outage
D - Keep power going temporarily in case of a power outage
What is the role of power inverters in power management?
A - Step power up
B - Step voltage down
C - Temporarily replace an unstable circuit
D - Keep power going in case of a power outage
A - Step power up
What is the main purpose of a server rail rack?
A - Hold the servers in the rack
B - Support servers without being mounted to a wall
C - To have servers attached to the rack in one location
D - To have servers attached to the rack in multiple locations
A - Hold the servers in the rack
In a two-post rack, where are the servers attached to the rack system? A - Front and back B - Top and bottom C - Twice on one side D - Once on each side
D - Once on each side
What is the main goal of a free-standing rack?
A - Hold the servers in the rack
B - Support servers without being mounted to a wall
C - To have servers attached to the rack in one location
D - To have servers attached to the rack in multiple locations
B - Support servers without being mounted to a wall
In addition to monitoring racks for access, what should also be monitored? A - Spacing B - Structure C - Performance D - Environmental conditions
D - Environmental conditions
What is the best way to secure a rack?
A - Place it in a mantrap
B - Through video monitoring
C - Place it where a security guard can see it
D - Place it in a room where a special key code or badge is needed to enter
D - Place it in a room where a special key code or badge is needed to enter
A technician wants to know what else to label besides patch panels so that an accurate network diagram can be built. What should the technician label in this case? A - Ports B - Racks C - Circuits D - Systems
A - Ports
A technician opens the electrical box containing all of the power switches in a building but has no idea which ones to turn on to try to restore power. What kind of labeling is needed so that the technician does not have that problem again? A - Ports B - Racks C - Circuits D - Systems
C - Circuits
A network guide states that each port should have a label containing the floor number, a dash, and then a port number corresponding to a cubicle area number hanging from a ceiling. What is this an example of? A - Naming system B - Naming convention C - Port labeling system D - Area labeling system
B - Naming convention
Which are considerations for device placement in a network? Choose three. A - Safety B - Airflow C - Electrical access D - User preference
A - Safety
B - Airflow
C - Electrical access
What could, without an emergency, cause temperatures in server racks to be either too high or too low? A - Improper air flow B - Overloading the CPU C - Maximizing RAM use D - Performing server maintenance
A - Improper air flow
On which layer of the OSI model are GIFs and MPEGs handled? A - Layer 4 B - Layer 5 C - Layer 6 D - Layer 7
C - Layer 6
Which part of layer 2 of the OSI model is responsible for error correcting and flow-control? A - IP B - LLC C - MAC D - Switch
B - LLC
On which layer on the OSI model does a switch with routing capability operate? A - Layer 1 B - Layer 2 C - Layer 3 D - Layer 4
C - Layer 3
Which are protocols that operate on layer 5 of the OSI model? Choose three. A - NFS B - SMB C - SNMP D - NetBIOS
A - NFS
B - SMB
D - NetBIOS
Which protocol is a connection-oriented protocol? A - IP B - TCP C - UDP D - SNMP
B - TCP
As a data packet is traveling down through the OSI model, what is taking place when encapsulation is taking place? Choose two. A - Trailers are being added B - Headers are being added C - A protocol is being added D - An address is being added
A - Trailers are being added
B - Headers are being added
A user can reach a website but cannot ping the website. The company hosting the website has probably blocked which protocol? A - TCP B - UDP C - ICMP D - IGMP
C - ICMP
Which type of multiplexing is used by broadband transmissions? A - TDM B - FDM C - BDM D - MDM
B - FDM
What is common to both analog and digital techniques for sending/receiving data? Choose two. A - Baseband B - Broadband C - Mutliplexing D - De-multiplexing
C - Mutliplexing
D - De-multiplexing
What type of transmission uses TDM? A - Satellite B - Ethernet C - Baseband D - Broadband
C - Baseband
Which is true about baud rates and bit rates?
A - Both are measured in bits per second
B - Both are measured in kilobits per second
C - Baud rates are measured in Hz while bit rates are measured in bits per second
D - Baud rates are measured in Hz while bit rates are measured in kilobits per second.
C - Baud rates are measured in Hz while bit rates are measured in bits per second
How does sampling affect overall performance of the network?
A - It makes it faster
B - It makes it slower
C - It has no effect on performance
D - It has long-term positive effects on performance.
B - It makes it slower
Which are types of carrier detect/sense networks for wired and wireless networks? Choose two. A - CDMA/CA B - CDMA/CD C - CSMA/CA D - CSMA/CD
C - CSMA/CA
D - CSMA/CD