NCCR 26110-23 Flashcards
What is a site plan?
A drawing showing the location of one or more building on the building site.
What is a floor plan?
A drawing of a building as if the building was cut through horizontally at about window level the the top portion remove.
What is a sectional view?
A cutaway drawing that shows the inside of an object or building.
What is a detail drawing?
An enlarged, detailed view taken from an area of a drawing and shown in a separate view.
In a sheet number for drawings, what does 0 mean?
General usage
In a sheet number for drawings, what does 1 mean?
Plans
In a sheet number for drawings, what does 2 mean?
Elevations
In a sheet number for drawings, what does 3 mean?
Sections
In a sheet number for drawings, what does 4 mean?
Large scale
In a sheet number for drawings, what does 5 mean?
Details
In a sheet number for drawings, what does 6 mean?
Schedules and Diagrams
What is an elevation view?
An architectural drawing showing height and width, but not depth; usually showing the front, rear, and sides of a building or object
What is a schematic diagram?
A detailed diagram showing complicated circuits, such as controls circuits. A schematic diagram has no scale but shows the components and their connections.
What is a shop drawing?
A drawing that is usually developed by the manufacturers, fabricators, or contractors to show specific dimensions and other pertinent information concerning a particular piece of equipment and its installation methods.
Where in the NEC does it provide the minimum number of receptacles in a dwelling unit?
210.52(A)
What section of the NEC provides information on calculating branch circuit loads for various occupancies?
220, part II, Sections 220.10 through 220.16
What is a drawing schedule?
A table that lists specific types of related information on a drawing.
What is a block diagram?
A single-line diagram used to show electrical equipment and related connections.
What is a one-line diagram?
A drawing that shows, by means of lines and symbols, the path of an electrical circuit or system of circuits along with the various circuit components.
The load on a branch circuit should exceed what?
80% of its rated capacity
In the MasterFormat 2020 standard what division is electrical?
26
