MQF: Emergency Procedures Flashcards
One long sustained ring on the emergency alarm bell means ________.
Abandon airplane
Bailout
Brace for impact
Three short rings on the emergency alarm bell means _______.
Prepare to abandon airplane (bailout)
Six short rings on the emergency alarm bell means __________.
Ditching or crash landing imminent
Chopping locations are painted on each side of the fuselage ________ each paratroop door. The locations are marked in _______ on the inside and in _____ on the outside of the fuselage.
Over; yellow; black
If a main wheel well fire exists, the area on both sides of the wheel well will be cleared of personnel and equipment for at least ____ feet (____ feet if pyrotechnics on board).
300; 600
If a main wheel well fire exists, or if hot brakes are suspected, chock _______.
Nose wheel only
Do not approach the main wheel well area when extreme temperatures due to excessive braking are suspected. If conditions require personnel to be close to an overheated wheel or tire assembly, the approach should be from the ____ or ____ only.
Forward, aft
If the possibility exists for fire to envelope munitions all non-essential personnel will withdraw to _______.
2,500 ft
If the Net Explosive Weight (NEW) exceeds 500 pounds with any hazard class 1.1 munitions on-board, non-essential personnel will withdraw to __________.
4,000 ft
Prolonged exposure (___ minutes or more) to high concentration (pronounced irritation of eye and nose or a sharp acrid odor) of fire extinguisher agent should be avoided.
Five
Smoke developed in the cargo compartment will move ________ into the ________. The ________ must be open to effectively eliminate smoke and fumes during all elimination emergencies.
Forward; flight station; forward escape hatch
Fire/Smoke and Fume: The aerial gunner _________ wear a restraint harness when opening the paratroop door.
Will
If notified of an In-flight door warning the Aerial Gunner will immediately ______.
Notify the passengers to fasten their safety belts
During Manual Flap Extension procedures, manually operate flaps to position indicated on the flap position indicator. Approximately _________ turns are required for full extension.
650
Manual Flap Extension: A ____________ is provided in the manual gearbox to prevent the operator from overloading the drive system.
Slip clutch