Jeppensen Chapter 3 Section F Flashcards

1
Q
  1. The most widely used meter movement is the ______ movement.
A

ANSWER: D’Arsonval

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q
  1. The D’Arsonval meter is a _______ (current or voltage) measuring instrument.
A

ANSWER: Current

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q
  1. A meter that requires one milliamp of current for full scale deflection has a meter sensitivity of ______ Ohms per-volt.
A

ANSWER: 1000

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q
  1. How much current is required to produce full-scale deflection in a 20,000 ohm-per-volt meter movement? _______ microampere(s)
A

ANSWER: 50

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q
  1. An ammeter shunt is connected in ________ (series or parallel) with the meter movement to measure current.
A

ANSWER: Parallel

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q
  1. The resistance of the shunt must be ______ ohms if the meter and shunt are to pass 50 milliamps of current for the meter to deflect full scale.
A

ANSWER: 2.04

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q
  1. An ammeter is connected in ______ (series or parallel) with the current that is to be measured.
A

ANSWER: Series

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q
  1. Multiplier resistors used to extend the range of a voltmeter are placed in ______ with the meter movement.
A

ANSWER: Series

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q
  1. The multiplier resistor must have _____ ohms of resistance for the meter to read full scale when 10 volts is placed across its leads.
A

ANSWER: 198000

How well did you know this?
1
Not at all
2
3
4
5
Perfectly