Husqvarna Rescue Saw Flashcards
The —— is designed to prevent accidental operation of the throttle.
Throttle trigger lock
Overexposure to vibration can lead to
Circulatory damage or nerve damage in people who have impaired circulation.
The —— is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.
Muffler
Test the integrity of each new cutting blade by running it at full throttle for
About one minute
High quality blades are often the most
Economical
Never use a diamond blade to cut
Plastic material
Never use a cutting blade with a lower
Speed rating than that of the power cutter.
Do not use abrasive blades with
Water
Test the abrasive blade by
Hanging it on your finger and tapping it lightly with a screw driver. If the blade does not produce a resonant ringing sound, it is damaged.
Sharpen the diamond blade by
Cutting into a soft material such as sandstone or brick.
Do not mix more than one month’s supply of
Fuel
Move the machine at least ——- from the refueling point before starting it.
10 feet.
This machine produces an ——- ——- during operation.
Electromagnetic field
The safety distance for the power cutter is
50 feet
Stand——— to the cutting blade. Avoid standing straight behind.
Parallel
Use wet cutting blades with —— when possible for optimal dust management.
DEX
Any time exhaust odors are noticed, carbon monoxide is present. Never use a gasoline power cutter indoors or in trenches more than
3 feet deep
The cutting blade continues to rotate up to ——— after the motor has stopped. (Blade coasting)
A minute
If the machine is low on power, difficult to start or runs poorly, always check the
Spark plug first
The electrode gap on the spark plug should be
0.5 mm
For correct tensioning of the drive belt, the square nut should be positioned
Opposite the marking on the belt cover
Adjust the idle speed using the T screw. When an adjustment is necessary, first turn the screw ———- until the blade starts to rotate. Now turn the screw ——— until the blade stops rotating.
Clockwise
Anti-clockwise
The fuel filter cannot be cleaned but must be replaced when it is clogged. The filter should be changed at least
Once per year.
The air filter only needs to be checked if the engine drops in power. The air filter mist not be cleaned with
Compressed air. This will damage the filter.
Clean the machine daily by —
Rinsing it with clean water after the work is finished
