Edraulic Cutters Flashcards

1
Q

Cutting: the blades should be positioned at ————- to the object to be cut , if possible.

A

90 degree angle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Higher cutting capacities can be achieved by

A

Cutting as close as possible to the blade’s pivot point.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

During cutting, the gap between the blade tips ( in traverse direction) must not be

A

Exceeded. Otherwise the blade is in danger of breaking.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

A visual inspection must be carried out after each use and at least every

A

Six months.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

A crack test of the blades is essential every

A

3 years.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Check the protective equipment used on/ in the vicinity of the rescue device. Pay particular attention to the

A

Protective cover for the movable parts. ( there may be no cracks!)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

When cleaning units and equipment, note that no cleaning agent may be used that has a pH value outside the range

A

5-8!

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

When exchanging the battery or power supply, the connection slot will light up for approximately—-

A

30 seconds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

—— must be worn when repairs are being carried out, as the devices may also be pressurized when not in operation.

A

Protective clothing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly