Gypsum Flashcards
Fire Code Type X
Gypsum
PG 5
Veneer Plaster more durable
Green Building Fundamentals
PG 11
Least expensive stud - 25 gauge
Green Building Fundamentals
PG 27
18 gauge ties to attach Chanel to furred areas
Green Building Fundamentals
PG 31
Use shorter shank nails to prevent pops
Green Building Fundamentals
PG 37
Fasteners
Green Building Fundamentals
PG 38-43
Maximum frame spacing table for drywall
Green Building Fundamentals
PG 73
Maximum frame spacing table for veneer plaster
Green Building Fundamentals
PG 74
Maximum height of steel stud
Green Building Fundamentals
PG 76
All studs same direction
Green Building Fundamentals
PG 77
Install resilient channels to joist at right angles
Green Building Fundamentals
PG 81
Wire hangers
Green Building Fundamentals
PG 83
Spacing of furring channel fasteners is 24” o.c.
Green Building Fundamentals
PG 87
Furring channel procedure for wall greater than 12’ high
Green Building Fundamentals
PG 88
temperature to hang drywall should be more than 50 degrees, acclimated for 24 hours at 55-70 degrees
Green Building Fundamentals
PG 103
Fastener spacing table
Green Building Fundamentals
PG 109
Gypsum control joint width is 1/2”
Green Building Fundamentals
PG 170
Skip trowel procedure
Green Building Fundamentals
PG 199
Job environment - greater than 55 degrees with humidity 20-50%
Green Building Fundamentals
PG 206
Normal Drying Conditions
Green Building Fundamentals
PG 207
The spacing of fasteners for corner bead must not be more than 12”
Green Building Fundamentals
PG 208
The door may be used as a wall control joint goes from the corner up
Green Building Fundamentals
PG 210
Spacing of control joints
Green Building Fundamentals
PG 234
Procedure to add plaster over old plaster
Green Building Fundamentals
PG 277
Storage Temperature
Green Building Fundamentals
PG 351
Base of stack 4”-6” from wall
Green Building Fundamentals
PG 407