Flight Plans Flashcards
How many ALTN Flight Plans can be loaded into CAAS at one time? (not stored on the card)
5
How many alternate flight plans can be stored on a mission card?
10
What does RNAV and RNP stand for?
Area Navigation
Required Navigation Performance
How many FPPs can a flight plan contain?
239
200- Future FPPs
39- History FPPs
What are the mission constraints that must be applied to an ACP in order to make it a FPP?
Airspeed
-or-
Time
-or-
Altitude
How many DATA pages are available for each FPP?
3
How many Mark Points are available?
15
What does the attribute MSD represent if showing by a flight plan point?
The first leg of a missed approach procedure
Name the four operations and procedures that are provided by the commercial flight management function in the CDU?
SIDs, STARs, holding patterns, visual and GPS approaches
What are the maximum number of Mission pages that can be set up in the CDU?
6
Which Flight Plan Management term is an ACP with specific mission requirements
Flight Plan Point (FPP)
Weight and Moment Arm can be entered for which fuel tank
ERFS tanks only
On the CDU PERF DEFAULTS page, toggling LS6 with a blank scratchpad changes the displayed ____ to the next field
Cargo Zone
Values on PERF INIT pages are derived from where
the values entered on the PERF DEFAULTS page or mission card
Once the aircraft is airborne, edits to the flight plan must be made through which page
PERF PROG or FPLN DATA pages
What type(s) of flight plan(s) allow(s) the inbound course to be changed
Active and Modified Flight Plans
How many data pages are available for each FPP
3
How many ACPs can be selected on the TARGET ACPS LIST page
1
Which MFD control layer provides access to the USER ACPS LIST page
SYS IDX
entering a “ - “ and selecting a data field will pull the default value from either one
of which 2 pages
either PERF DEFAULTS or the Performance Database
What does Lift-Off Reset allow the operator to do and when is this function available
to re-establish the start point for the current flight plan and is only available when the A/C is in a WOW condition
What is mission fuel
the amount of fuel available to CAAS for mission planning
What page do you go to in order to create a Hold pattern
FPLN MGMT → PROC/PATT → HOLD
Window for P RAIM
± 15 minutes
The Approach for Reference Only page is displayed only when
the selected approach is an ILS, Localizer only, Localizer/Backcourse, LDA, or SDF approach
What CDU page lets me designate the fuel in the Extended Range Fuel System (ERFS) tanks as cargo?
Perf Prog
What color is the TO FPP displayed on the active FPLN page
White
What does the ATTRIBUTE “T” on the FPP line mean
FPP has a FIXED arrival time designated
Which CDU page provides access to the MOVING ACP LIST page
PROC/PATT
Does the active flight plan have to be named
No, unless you want to save it to your data card
On the Active Flight Plan page (FPLN), what does typing L0.5 in the scratchpad and selecting LS1 direct the system to do?
Offsets the course to the left by 5 miles
What does changing a flight plans point inbound course from 360º to C 330º tell CAAS to do
Change to overfly the point at that course
Which CDU software partition contains SIDs, STARs, Holding Patterns, Visual and GPS approaches
Commercial FMF
On PERF INIT 2/2, if you place a “U” in the OAT bracket at LS2 what have you told the system to do
use sensed data
