Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

Control & Fanuc Alarm Codes 101 > Feed & Speed Errors 5## | EAGLE MACHINE INC. > Flashcards

Feed & Speed Errors 5## | EAGLE MACHINE INC. Flashcards

You may prefer our related Brainscape-certified flashcards:
Physics 101 flashcards Psychology 101 flashcards Chemistry 101 flashcards Biology 101 flashcards Organic Chemistry 101 flashcards Sociology 101 flashcards
1
Q

500 - FEED HOLD ACTIVE

A

The feed hold button was pressed and needs to be reset.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

501 - FEEDRATE NOT SET

A

A feedrate value is missing from the program.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

502 - CONSTANT SURFACE SPEED ERROR

A

A problem with G96 or spindle speed override.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

503 - ILLEGAL AXIS FEEDRATE

A

The feedrate command for one or more axes is invalid.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

504 - MACHINE NOT READY

A

The machine conditions are not set to allow feed or speed commands.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

505 - TOOL OFFSET NOT SET

A

Tool offset values are required but not specified.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

506 - WORK OFFSET NOT SET

A

Work offset values are missing or improperly defined.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

507 - FEEDRATE OVERRIDE MISMATCH

A

The feedrate override is incompatible with the programmed feedrate.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

508 - RAPID TRAVERSE RATE EXCEEDED

A

The commanded rapid traverse exceeds the machine’s limits.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

509 - FEEDRATE OUT OF RANGE

A

The feedrate specified is outside the permissible range.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

510 - TOOL LENGTH COMPENSATION ERROR

A

Feed or speed conflict with tool length compensation values.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

511 - SPINDLE OVERLOAD

A

Spindle load exceeds the permissible limits.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

512 - AXIS SERVO ERROR

A

A servo motor fault prevents proper feed operation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

513 - SPINDLE SPEED NOT SET

A

A spindle speed value is required but not provided.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

514 - INVALID CUTTING FEEDRATE

A

The cutting feedrate is not valid or supported for the operation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

515 - SPINDLE SPEED RANGE ERROR

A

The programmed spindle speed range is not supported by the machine.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

516 - TOOL WEAR COMPENSATION ERROR

A

Feed or speed conflict with tool wear compensation values.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

517 - G95 MODE FEED ERROR

A

Feed per revolution (G95) is invalid or improperly programmed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

518 - G94 MODE FEED ERROR

A

Feed per minute (G94) is invalid or improperly programmed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

519 - CONSTANT FEEDRATE DEVIATION

A

The actual feedrate deviates significantly from the programmed feedrate.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

520 - CONSTANT SURFACE SPEED DEVIATION

A

The spindle speed does not adjust correctly for constant surface speed (G96).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

521 - TOOL OFFSET CONFLICT

A

Feed or speed conflict with tool offset values.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

522 - FEEDRATE EXCEEDS TOOL CAPACITY

A

Feedrate exceeds the tool’s capability or limits.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

523 - INVALID INCREMENTAL FEED

A

Incremental feedrate values are invalid or unsupported.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

524 - MISSING SPINDLE SPEED OVERRIDE

A

A spindle speed override is required but not provided.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

525 - INVALID FEEDRATE OVERRIDE

A

The feedrate override value is invalid or outside acceptable limits.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

526 - SPINDLE SPEED OVERRIDE CONFLICT

A

Spindle speed override conflicts with programmed speed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

527 - TOOL PATH FEEDRATE MISMATCH

A

The feedrate is inconsistent with the toolpath requirements.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

528 - RAPID FEEDRATE ERROR

A

Rapid feedrate value is invalid or improperly programmed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

529 - CONFLICTING G-CODES FOR FEEDRATE

A

Multiple G-codes affecting feedrate were input in the same block.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

530 - INVALID SPINDLE ACCELERATION

A

Spindle acceleration or deceleration is not within allowable limits.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

531 - MISSING THREAD FEEDRATE

A

Threading cycle lacks a specified feedrate.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

532 - EXCESSIVE SPINDLE SPEED FLUCTUATION

A

Spindle speed fluctuates beyond acceptable tolerances.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

533 - FEED HOLD TIMEOUT

A

The feed hold condition was not reset within the allowed time.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

534 - INVALID TAP FEEDRATE

A

The feedrate for tapping is not correctly programmed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

535 - FEED OVERRIDE TOO HIGH

A

Feedrate override exceeds the machine’s allowable limit.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

536 - SPINDLE LOAD MISMATCH

A

Spindle load is incompatible with the programmed feedrate or speed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

537 - ILLEGAL FEED OVERRIDE IN RAPID MODE

A

Feed override is not supported during rapid traverse.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

538 - CUTTING SPEED MISMATCH

A

The cutting speed is inconsistent with the programmed values.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

539 - TOOL LIFE FEED CONFLICT

A

Feedrate exceeds limits set for the tool’s remaining life.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
41
Q

540 - FEEDRATE NOT SYNCHRONIZED

A

Feedrate is not synchronized with spindle speed as required.

42
Q

541 - TOOL DIAMETER FEED CONFLICT

A

Feedrate conflicts with tool diameter compensation values.

43
Q

542 - EXCESSIVE FEED OVERRIDE

A

Feedrate override is beyond allowable values for the operation.

44
Q

543 - INVALID SPINDLE TORQUE SETTING

A

The spindle torque setting is invalid or conflicts with the feedrate.

45
Q

544 - SPINDLE SPEED SETTING NOT SUPPORTED

A

The programmed spindle speed is unsupported in the current mode.

46
Q

545 - TOOL LENGTH FEED ERROR

A

Feedrate conflicts with programmed tool length.

47
Q

546 - INVALID TAP SPEED

A

The spindle speed for tapping is improperly programmed.

48
Q

547 - G93 FEED MODE ERROR

A

The inverse time feedrate (G93) is invalid or incorrectly configured.

49
Q

548 - FEED OVERRIDE NOT SUPPORTED

A

Feedrate override is not available in the current mode.

50
Q

549 - TOOL PATH VELOCITY ERROR

A

Tool path velocity is outside acceptable parameters.

51
Q

550 - SPINDLE SPEED INVERSE TIME ERROR

A

Spindle speed conflicts with the inverse time feedrate (G93).

52
Q

551 - INVALID FEEDRATE COMPENSATION

A

Feedrate compensation is improperly programmed.

53
Q

552 - TOOL WEAR FEED OVERRIDE ERROR

A

Tool wear feedrate override exceeds allowable limits.

54
Q

553 - SPINDLE LOAD FEED CONFLICT

A

Spindle load is not compatible with programmed feed settings.

55
Q

554 - INVALID CUTTING SPEED COMPENSATION

A

Cutting speed compensation values are out of range.

56
Q

555 - FEED OVERRIDE RANGE EXCEEDED

A

The feedrate override is outside the permissible range.

57
Q

556 - MISSING SPINDLE TORQUE VALUE

A

Spindle torque value is required but not provided.

58
Q

557 - TOOL COMPENSATION FEED MISMATCH

A

Feedrate conflicts with tool compensation settings.

59
Q

558 - ILLEGAL CUTTING FEED COMMAND

A

Cutting feedrate command is invalid or improperly configured.

60
Q

559 - INVALID SPEED FOR THREADING

A

Spindle speed for threading is out of range.

61
Q

560 - SPINDLE LOAD EXCEEDS LIMITS

A

The spindle load is too high for the programmed feedrate.

62
Q

561 - FEEDRATE NOT ALLOWED DURING RAPID MOVE

A

Feedrate commands are invalid during rapid traverse operations.

63
Q

562 - FEEDRATE INCOMPATIBLE WITH TOOLPATH

A

The specified feedrate conflicts with the programmed toolpath.

64
Q

563 - SPINDLE ACCELERATION ERROR

A

Spindle acceleration is not synchronized with the feedrate.

65
Q

564 - SPINDLE DECELERATION ERROR

A

Spindle deceleration exceeds allowable parameters.

66
Q

565 - FEEDRATE INTERRUPTION ERROR

A

Feedrate change was interrupted unexpectedly during operation.

67
Q

566 - TOOL LOAD LIMIT EXCEEDED

A

Feedrate causes excessive load on the tool.

68
Q

567 - MISSING CUTTING SPEED VALUE

A

Cutting speed is required but not specified in the program.

69
Q

568 - INVALID THREAD PITCH VALUE

A

Thread pitch does not align with the programmed feedrate or spindle speed.

70
Q

569 - SPINDLE SPEED LIMIT EXCEEDED

A

Spindle speed exceeds the machine’s configured limits.

71
Q

570 - TOOL LENGTH OVERRIDE ERROR

A

Tool length override causes a conflict with the feedrate.

72
Q

571 - INVALID INVERSE TIME VALUE

A

The inverse time feedrate (G93) is not configured correctly.

73
Q

572 - FEED OVERRIDE DISALLOWED IN THREADING

A

Feedrate override is not permitted during threading operations.

74
Q

573 - ILLEGAL RAPID FEED OVERRIDE

A

Feed override is not supported for rapid moves.

75
Q

574 - TOOL DIAMETER CONFLICT WITH FEEDRATE

A

The feedrate conflicts with tool diameter settings.

76
Q

575 - MISSING FEED HOLD RESET

A

Feed hold was not reset before resuming operation.

77
Q

576 - SPINDLE TORQUE LIMIT ERROR

A

Spindle torque limit is exceeded at the current feedrate.

78
Q

577 - CONSTANT SURFACE SPEED NOT MAINTAINED

A

Spindle speed adjustment for constant surface speed failed.

79
Q

578 - ILLEGAL SPINDLE OVERRIDE COMMAND

A

Spindle override command is not allowed during the current operation.

80
Q

579 - TOOL WEAR FEEDRATE ERROR

A

Tool wear settings cause an incompatible feedrate.

81
Q

580 - ILLEGAL CUTTING DEPTH FEEDRATE

A

Feedrate conflicts with the programmed cutting depth.

82
Q

581 - SPINDLE LOAD TORQUE MISMATCH

A

Torque settings for the spindle are incompatible with the feedrate.

83
Q

582 - INVALID FEEDRATE FOR SUBPROGRAM

A

Subprogram contains a feedrate that is out of range or improperly formatted.

84
Q

583 - TOOL LIFE LIMIT FEED ERROR

A

Feedrate causes tool life limits to be exceeded.

85
Q

584 - SPINDLE SPEED OVERRIDE RANGE EXCEEDED

A

Spindle speed override exceeds permissible settings.

86
Q

585 - INVALID SPINDLE AND FEEDRATE RATIO

A

Spindle speed and feedrate are not proportionally set.

87
Q

586 - FEEDRATE INTERRUPTION NOT SUPPORTED

A

Feedrate interruptions are not allowed in the current operation.

88
Q

587 - TOOL WEAR COMPENSATION NOT ENABLED

A

Tool wear compensation is required but not active.

89
Q

588 - SPINDLE ROTATION NOT ALIGNED WITH FEED

A

Spindle rotation conflicts with feed direction settings.

90
Q

589 - FEEDRATE FLUCTUATION EXCESSIVE

A

Feedrate fluctuates beyond acceptable tolerance during operation.

91
Q

590 - INVALID FEEDRATE IN TAPPING MODE

A

The feedrate is not appropriate for tapping operations.

92
Q

591 - MISSING SPINDLE SPEED DURING TAPPING

A

Spindle speed is not specified in a tapping cycle.

93
Q

592 - RAPID FEEDRATE STOPPED UNEXPECTEDLY

A

Rapid feedrate stopped due to an error or conflict.

94
Q

593 - TOOL OFFSET SPEED CONFLICT

A

Spindle speed conflicts with programmed tool offset settings.

95
Q

594 - INVALID CONSTANT SURFACE SPEED RANGE

A

Constant surface speed value is not supported for the current operation.

96
Q

595 - FEEDRATE UNSUPPORTED IN MULTI-AXIS MODE

A

The specified feedrate is not allowed in multi-axis configurations.

97
Q

596 - SPINDLE SPEED OUTSIDE THREADING RANGE

A

Spindle speed exceeds the threading operation’s limits.

98
Q

597 - ILLEGAL TORQUE COMPENSATION

A

Torque compensation settings conflict with feedrate.

99
Q

598 - INVALID FEEDRATE COMPENSATION VALUE

A

Feedrate compensation exceeds the allowable range.

100
Q

599 - SPINDLE LOAD IMBALANCE DETECTED

A

Imbalance between spindle load and feedrate settings.

Control & Fanuc Alarm Codes 101 (12 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions