FAULTS.2 Flashcards
1
Q
SECTIONS FAIL TO FORM RIBBONS
- Surfaces and edges of the block are not parallel
- remedy: - Horizontal surface of the block is not parallel to the knife
- remedy: - Paraffin wax is too hard
- remedy: - Knife is tilted too much
- remedy: - Sections are too thick
- remedy: - Knife is dull
- remedy:
A
- Surfaces and edges of the block are not parallel
- remedy: re trim the block - Horizontal surface of the block is not parallel to the knife
- remedy: re adjust & re orient the block - Paraffin wax is too hard
- remedy: coat horizontal edges of the block w/ wax of lower MP - Knife is tilted too much
- remedy: reduce the tilt - Sections are too thick
- remedy: readjust the thickness of sections - Knife is dull
- remedy: hone and strop
2
Q
SECTIONS EOLL UP ON CUTTING SO THAT THEY ADHERE AND GET BROKEN AGAINST THE KNIFE EDGE
- Knife is blunt
- remedy: - Tilt of knife is too great
- remedy: - Knife edge is dirty
- remedy:
A
- Knife is blunt
- remedy: sharpen the knife - Tilt of knife is too great
- remedy: reduce the tilt - Knife edge is dirty
- remedy: clean the knife edge
3
Q
FROZWN TISSUE CRUMBLES AND COMES OFF RHE BLOCK HOLDEE WHEN CUT
- Reason:
- Remedy:
A
- Reason: freezing is not adequate
- Remedy: refreeze the tissue block
4
Q
FROZWN TISSUE CHIPS INTO FRAGMENTS WHEN CUT
- Reason:
- Remedy:
A
- Reason: tissue is frozen too hard
- Remedy: warm the tissue w/ fingers