FASTENER Flashcards
A device with head on one end of a
shank or body and a thread on the other
end designed to mate with a tapped nut.
a. Screw
b. Bolt
c. Stud
d. None of the above
Bolt
It is a headed and threaded bolt used
without a nut.
a. Screw
b. Bolt
c. Stud
d. None of the above
Screw
It is a fastener with no head but is has
threads at both ends of the shank.
a. Screw
b. Bolt
c. Stud
d. None of the above
Stud
A fastener where tension is normally
induced in the bolt to compress the
assembly by rotating the nut.
a. Screw
b. Bolt
c. Stud
d. None of the above
Bolt
A fastener that is inserted into an
internally tapped holed and tension is
induced by rotation of the head.
a. Screw
b. Bolt
c. Stud
d. None of the above
SCREW
It is a fastener like screw which is
inserted in a tapped hole and a nut is used
on the other end to create tension.
a. Screw
b. Bolt
c. Stud
d. None of the above
Stud
A fastener which is threaded in the
entire length and a nut is used on both
ends to create tension serving the function
of a bolt.
a. Stud
b. Bolt
c. Stud bolt
d. All of the above
Stud bolt
A machine screw used for general
purpose.
a. Hexagonal head
b. Hexagonal flange head
c. Pan head
d. None of the above
Hexagonal head
The type of set screw used for general
purpose.
a. Slotted head
b. Square head
c. hexagon socket head
d. None of the above
Square head
The type of screw thread used for
rotating machine members such as impeller
shafts.
a. Right-hand tread
b. Left-hand thread
c. Square thread
d. None of the above
Left-hand thread
A type of screw thread used for almost
all fastening applications.
a. Right-hand thread
b. Left-hand thread
c. Square thread
d. None of the above
Right-hand thread
A type of rivet used for fastening metal
parts together when the reverse joint is not
accessible or is too restricted.
a. Cold forged rivet
b. Semi-tubular rivets
c. Blind rivet
d. None of the above
Blind rivet
The diameter of a bolt is
measured based on the ______
a. outside of the major diameter of
the thread of the bolt.
b. diameter of head of the bolt
c. diameter of the shank
d. None of the above
outside of the major diameter of
the thread of the bolt.
The length of the bolt is
measured from _____
a. head length.
b. thread length.
c. under the head of the bolt to the
end of the bolt.
d. None of the above
under the head of the bolt to the
end of the bolt.
Which of the following is the
style of bolt head?
a. Round countersunk
b. Round
c. Square
d. Hex
e. All of the above
f. Two of the above
AOTA