Evolution 6 Drafting Ans Supplying Second Pumper

Question 0

You should connect which end of suction to the inlet of pumper

Answer 0

Female butt

Question 1

What knot is used used To secure strainer end of suction connection when drafting water

Answer 1

Clove hitch and binder

Question 2

What side of pumper should be inboard

Answer 2

The operating side

Question 3

When laying out hose you should lay out 3 inch hose and 2 1/2 inch hose which do you lay out first and which do you connect first

Answer 3

Lay out hose simultaneously but connect 3 inch first

Question 4

When tying off suction connection you can tie off to a substantial part of the bulkhead or pumper which is the preferred method

Answer 4

Tying off to the substantial part of pumper is preferred

Question 5

True or false the strainer end is placed perpendicular to and just below the surface of water

Answer 5

False :

Parallel and well below the surface

Question 6

When supplying the second pumper you must stretch one 3 inch line and one 2 1/2 each line simultaneously

Answer 6

False u may stretch two 3 inch supply lines if necessary

Notes :
Connections in suction line must be air tight

connect and supply second pumper with 3 inch hose first then connect 2 2/2 to second pumper using a 2 1/2 to 3 increaser

Question 7

All connections and knots of suction assembly should be made before connecting to inlet side of the pumper
True or False

Answer 7

True