Evolution 13 Cellar Pipes

Question 0

When using sub-cellar pipe where is position of crossbar?

Answer 0

Between the pipe and the building

note if note possible to arrange crossbar so that between pipe and building then pipe shall be placed between crossbar and building

Question 1

When stretching to supply a cellar pipe you should insert a one way gate how far away from discharge end?

Answer 1

One length from discharge end

NOTE when available 3” hose shall be stretched to front of building then reduced to 2 1/2

Question 2

If using bent cellar pipe on exterior entrance to cellar what do you use to support pipe?

Answer 2

A portable ladder placed across opening

Question 3

When using a sub-cellar pipe how do you know the direction of the stream?

Answer 3

When properly assembled observe the position of the handles on upper section. The are always at right angles to nozzle

Question 4

When using BRESNAN, BONNER AND NEW YORK DISTRIBUTORS, how do we know it’s in proper position?

Answer 4

Lower through opening until touches floor or stock below then raise until midway and operate in that position

Question 5

Heffernan and Dougherty distributors are used for ship and pier fires what hose sizes are used to supply each distributor

Answer 5

3 1/2 for heffernan

3” for Dougherty