DT6 - 168s Flashcards
What illuminates the Cant Rail light on 168s
- Fire
- TCA
- Interlock lost
- PassCom
What leads to a passcom flashing with a buzzer on 168s
- 2 keys
- PassCom
- Brake MCB on 0s and 1s
What leads to a passcom flashing without a buzzer
- Train control (on 2s only if tripped in rear coach)
- coupler button pressed in error
- Brake MCB on 2s and 3s
Cab ICs on 168s
0,1,3:
- Tripcock
- Horn
- Wash/wipe
- Uncoupler
- PBAC
2:
Above, plus Cab door
What ICs in Body-end cupboard?
DMOS/MOS - Gangway door
MOSL/DMOSL - Gangway door + toilet flush
Where is the internal BCIC
- Under seats nearest A2 doors
- Also includes brake gauge and PBAC in MOS/L coaches
What indicates level 1 fault
Key in, flashing train fault light
What indicates level 2 fault
Key in, steady train fault light
What indicates level 3 fault
Key out, flashing train fault light
Which doors do door supply 1 and 2 relate to
- DS1: A, D doors
- DS2: B, C doors
What ICs are in the brake raft
- Brake Cylinder 1 IC
- Brake Cylinder 2 IC
- Air Suspension 1 IC
- Air Suspension 2 IC
- Compressor Governor IC
- Main Reservoir Pipe IC
- Main Reservoir IC
What four positions does the battery isolation switch have
- Isolate
- Aux. Battery
- Start Battery
- Aux. + Start Battery
On a 168-2, what happens if an engine shutdowns
Crossfeeds from the other coach.
Get: 2/3 lights, 1/2 AirCon, 100% cab power.
What does the Hydrostatic system power
- Alternator
- Radiator fan
What is in every body-end cupboard
- Interface units
- MCBs
- fault indicator lights (with peephole in door)
- WSP rack
What codes can the WSP display for normal running
95, 99
What 4 MCBs do you need to trip and reinstate to restart the engine
- Local control
- Engine Control 1, 2
- Engine starting
Indications for Brake MCB
- Passcom (with buzzer on 0,1)
- DRA illumination goes out (on 1,2,3 if leading coach)
- EBA
Indications for Train Control MCB
- If in leading cab: passcom FNB (not on 2s), lose GSM-R, PIS in ‘slave’, desk goes unlit, interlock lost, EBA
- Rear cab: EBA, passcom FNB, interlock lost
What do the 4 letters indicate on the fault indicator
- A: active/current fault
- B: up to 1 hr ago
- C: 1 - 4 hrs ago
- D: 4 - 12 hrs ago