Danby Gas Ranges Flashcards
Why does this appliance have a regulator? (Danby Range)
To adjust the gas pressure for that required by the appliance.
What is the supply pressure to the manifold after going through the regulator? (Danby Range)
You should be able to find the supply pressure on the regulator itself…
Is this regulator adjustable? (Danby Range)
Yes, if you need to change from natural gas to propane…
What is this small round item on the regulator? (Danby Range)
It could be the item that you can flip to switch from Natural Gas to LP , vice versa.
What would you do with the regulator if you are changing the appliance from natural gas to propane? (Danby Range)
Flip the removable cap from the regulator.
Is there anything else required to convert this appliance to propane? (Danby Range)
1) Flip Regulator
2) Change orifices
3) Change oven orifice
4) Adjust primary air top burner
5) Change primary air oven
6) Adjust top gas pilots for top burners and oven
What should you do if you’re performing a dial test on a gas meter and this appliance is connected to the gas piping system? (Danby Range)
Make sure there are no openings in the gas line, make sure all shut off valves at the appliance are open, open the gas at the meter, mark the location of the needle on the smallest dial, wait ten minutes, if there is any movement of the dial there is a leak and you must use soap test, one the leak is fixed conduct the test again until there is no movement of the test dial.
Describe the process to light the oven pilot. (Danby Range)
Push oven button down for gas and light pilot.
What is an anti-tip device? (Danby Range)
It prevents the stove from tipping over when the oven door is open.
Where is it located? (Danby Range)
At the back somewhere.
Danby oven parts (Danby Range)
Thermocouple, pilot, burner, heat sensor, orifice, primary air adjustment.
