CUE 3234 (Urban Climates) Flashcards
Outline the urban canopy layer.
Below roof level, directly above buildings. Where processes act in space between buildings.
Outline urban boundary layer.
Layer way above buildings and UCL.
What does a high albedo mean?
The surface reflects the majority of the radiation that hits it, and absorbs the rest (even though it’s only a little)
What does a low albedo mean?
A surface reflects a small amount of the incoming radiation and absorbs the rest (the majority).
Which surfaces have the highest albedo?
Surfaces that are translucent or white (eg ice and snow)
How is albedo expressed?
On a scale from 0-1.
0 = total absorption (dark colours)
1 = complete reflecting of solar energy (light colours)
Urban environment albedos tend to be much _____ than those of rural areas.
Lower
In the CBD, when are temperatures typically highest?
Mid afternoon
In the UHI, where do you see secondary peaks of high temperatures?
Over other built up areas such as suburban residential areas.
The temperature range from rural to city centre is often ________ at night.
Greatest
Why is the temperature range from rural to city centre greatest at night?
Because of the high heat storage capacity of building materials compared to vegetation.
How much variation in surface temperature in surface temperatures over areas of water? Why?
Very little. Because water maintains a constant temperature 24/7 due to its high heat capacity.
What are the 5 strategies for managing the UHI?
- cool surfaces (eg cool roofs)
- green roofs
- urban greening
- sky view factor
- cool cars
What are the two levels within the urban dome?
Urban canopy and urban boundary layer
Cool surfaces
Cool roofs built from materials with a high albedo absorb and store less solar energy during the day, and do are not major emitters of heat into the urban atmosphere at night.
Green roofs
Green roofs can reduce rooftop tenure tire by 20 - 40* on a sunny day. They also reduce:
- rainwater runoff
- act as insulators
- increase urban biodiversity by providing habitat space for birds and small animals.
Urban greening
Planting vegetation provides shade and can have a natural cooling effect as seen by lower temperatures in urban parks. They also:
- act as carbon stores
- reduce urban flooding
- filter pollutants from the air (eg photosynthesis)
Sky view factor
This describes the relative openness between buildings in an urban area. A restricted sky view, as found for narrow streets and tall buildings will reduce the escape of hear from the street and building surfaces. This can contribute to the accumulation of heat within street canyons and lead to the increase in air temperatures.
In addition, if streets are angled perpendicular to the prevailing wind, during intense UHI events, this will reduce the change in ventilation and removal of heat and pollutants which accumulate between buildings.
Cool cars
A lighter coloured car shell reflects more sunlight than a traditional dark car. This cools the inside of the car and reduces the need for air con. Cars in cities contribute significantly to higher temperatures and pollution levels.
Rainfall is ______ over urban areas than rural areas.
Higher
Why is rainfall higher over urban area than a rural area?
- UHI generates convection currents so uplift causes cloud formation.
- Lower pressure over urban areas because of rising air.
- Buildings promote vertical uplift of air; encouraging rain.
- Pollution increases cloud formation and hygroscopic nuclei assist in raindrop formation.
- Lots of water vapour from industries and power stations.
Under what conditions are intensity, frequency and length of fogs greatest?
Anticyclonic conditions
In which areas are the likelihood of thunderstorms greatest?
Urban areas, particularly in hot, humid conditions eg late summer in late afternoon
Cloud cover is increased in _____ areas
Urban
What are convection currents generated by?
Higher temperatures of the urban microclimates and so there is a larger number of condensation nuclei which will therefore form more clouds.