Communications Flashcards
How do you activate and deactivate the oxygen mask microphone
Activate - When the mask is removed it is automatically activated
Deactivate - Close the storage doors and pusht eh test/reset button
What does the COMM TEST BUTTON do on the VHF radio
Temporarily disables the squelch
What does PA - ON switch do….
PA ON- push to connect handset on the aft pedestal to the PA system
Entinguished - Replace handset to extinguish the light
What happens when the ATTND button illuminates
CALL- push to intiate a call to the cabin
This illuminates when the flight attendant calls the flight deck.
What happens to the ATTND button when the FA calls
Illuminates when the FA calls the flight deck
MAINT INTPH SWITCH-ON
MAINT INTPH SWITCH-OFF
ON-Push switchlight to activate all service interphone jacks throughout the plane. If pushed again all phones will be disconnected and the switch is extinguished
What does the MECH Button….
What does it mean the CALL illuminates on the mechanic button….
CALL-push to sound the mechanic horn.
This illuminates when ground personnel push the pilot call switch at the ground service panel
What happens when the MECH button illuminates
Ground personel pushed the pilot call switch on the ground service panel
How can you make a PA anouncement (2)
- Pushing the audio control panel PA Button and using the boom or oxygen mic
- Flight deck service interphone handset if the PA Switch on overhead panel is selected on
Who takes priority over PA announcments
The flight deck takes priority over cabin entertainment or any PA announcements made from any cabin station
What is the difference between FLIGHT and SERVICE Interphone
Service- Allows communications between service and maintenance locations around the aircraft and the flight deck and flight attendant stations
FLIGHT-provides communications between the flight crew as well as communications at the external power panel.
MAINT INTPH Switch
Activates all service interphone jacks throughout the airplane and ON illuminates
Pushed again the light extinguishes and all stations are disconnected from the SVCE INTPH except E/E COMP, GROUND CONTROL PANEL, FLIGHT ATTENDANT STATIONS
How do you recognize a incoming SELCAL
Works with VHF Systems
When a call is incoming a chime sounds and you get a C illuminate on the VHF radio button
How much of the CVR is preserved and how can you turn it off
2 Hours and it continuosly operates whenever power is on
When can the CVR be erased
Aircraft ground sensing system is in ground mode and the parking brake set. Push the ERASE button on the CVR MICROPHONE MONITOR.