CM Advanced Ch.2

Question 1

In a NMCB the equipment maintenance branch is composed of four sections: administrative, automotive repair, heavy equipment repair, and what else?

Answer 1

Support shops

Question 2

You can obtain the information on the physical arrangement of buildings from what source?

Answer 2

NAVFAC P-437

Question 3

What equipment must be operated in an area apart from the rest of the maintenance shop?

Answer 3

Welding

Question 4

When an area or shop has been established to repair injectors and injector pumps, it will normally be under the supervision of what supervisor?

Answer 4

Heavy equipment repair

Question 5

Who are assigned to operate the machine shop trailer, which contains lathes, drills presses, grinders, and other machine tools?

Answer 5

Machinery repairmen (MRs)

Question 6

Manned by CMs, what shop repairs, rebuilds, cleans, adjusts, and tests all automotive electrical parts and accessories, such as generators, starters, and voltage regulators?

Answer 6

Electrical

Question 7

Electrical light fixtures and plug-in connections should be of what design?

Answer 7

Explosive-proof

Question 8

What is the central point for issues of all mechanics’ tools under an approved custody control system?

Answer 8

Mechanic tool-room

Question 9

On construction battalions, SWs and what else form the nucleus of the ALFA company steel shop?

Answer 9

Hull technicians (HTs)

Question 10

What percent of the CESE assigned to a construction battalion use pneumatic tires?

Answer 10

90%

Question 11

At main body sights and large detachment sites, the person assigned as cost control supervisor is normally a what?

Answer 11

CM1

Question 12

Who is responsible for summarizing the total cost of repair parts and labor expended and of making these entries in the appropriate ERO blocks?

Answer 12

Cost control clerk

Question 13

All requisitions for not in stock (NIS) and not carried(NC) materials must pass through the what?

Answer 13

DTO clerk

Question 14

Who is responsible for all the CESE maintenance, parts, and operators’ manuals assigned to the NCF unit?

Answer 14

Technical librarian

Question 15

The purpose of what program is to keep CESE In a constant safe and serviceable condition at a minimum cost and to detect and correct minor deficiencies before they lead to costly repairs?

Answer 15

Battalion maintenance

Question 16

The CESE maintenance system of the NCF and special operating units (SOU) has how many categories of maintenance?

Answer 16

Three

Question 17

What maintenance includes daily inspections, lubrications, and adjustments necessary to ensure early detection of malfunctions of CESE?

Answer 17

Operators

Question 18

What maintenance encompasses the removal, replacement, repair, alteration, calibration, modification, rebuilding, and overhaul of assemblies, subassemblies, and components?

Answer 18

Intermediate

Question 19

What maintenance is performed on equipment that requires major overhaul or restoration to the degree necessary to restore the unit to a like-new condition?

Answer 19

Depot

Question 20

The standard interval between preventive maintenance service inspections for NCF CESE is how many working hours?

Answer 20

40

Question 21

PM record cards are maintained by the PM group in a tickler file, which the maintenance supervisor reviews at least how often?

Answer 21

Monthly

Question 22

The type B PM inspection is performed after how many consecutive type A inspections, using the appropriate PM service and inspection guide?

Answer 22

Two

Question 23

The equipment repair order (ERO) and what else are used by the NCF to record costs of repairs, hours required for repairs, and total time the equipment is out of service?

Answer 23

Continuation sheet

Question 24

What is the sole authority to perform work on equipment, whether the work is performed in the field or in the shop?

Answer 24

ERO

Question 25

An ERO is required each time labor time exceeds how long or materials are expended on scheduled PM, interim repairs, modernization or alteration of equipment, or deadline cycling or preservation of equipment?

Answer 25

1 hour

Question 26

NAVFAC- funded initial outfitting repair parts allowances required by the NCF for support of its assigned equipment are listed in what?

Answer 26

Consolidated Seabee allowance lists (COSAL)

Question 27

Repair parts allowances are designed to provide a 90% effectiveness for 1,800 construction hours or how many days support?

Answer 27

90

Question 28

What are used to control the allowed item range for each of the various organizational maintenance capabilities?

Answer 28

Maintenance codes

Question 29

Inadequate or deficient TMs are reported to what?

Answer 29

CESO

Question 30

The job control number consists of how many alphanumeric characters?

Answer 30

Fourteen (14)

Question 31

What instruction series establishes uniform procedures to be followed during battalions on site relief and equipment turnover?

Answer 31

COMCBPAC/COMCBLANTINST 11200.1

Question 32

Notify COMCBPAC equipment office, Port Hueneme, CA; COMCBLANT detachment, Gulfport, MS; and the battalion being relieved of the commencement date of the BEEP at least how many days before commencement date?

Answer 32

30

Question 33

It is recommended that the BEEP start at least how many days before the arrival of main body?

Answer 33

10

Question 34

The repair parts portion of the BEEP will be accomplished according to what series?

Answer 34

COMCBPAC/COMCBLANTINST 4400.3

Question 35

Complete safety instructions for hazardous materials storage are listed in what?

Answer 35

EM 385-1-1

Question 36

Oil and grease must NOT be allowed to come in contact with what?

Answer 36

Gases