Chapter 8: Debt Finance Flashcards
- Debt finance
1.1 Introduction
In the previous topic we considered the way in which a company may raise money through the issue of shares. However, for many private companies, it may in practice be difficult to raise money through equity finance, since private companies are unable to offer shares to the public (s 755 CA 2006).
An alternative option to raise finance for any company is to borrow money (debt finance), usually from a bank. Most companies will have unrestricted power to borrow. However, it is necessary to check the company’s articles to ensure that there are no restrictions.
1.2 What is debt finance?
Although there are many types of debt finance available under different names, they can all be
classified as either loan facilities or debt securities. A lender will wish to ensure that they are protected as far as possible from the possibility that the borrowing company may be unable to repay the loan. A key method of protection is for the lender to take security over the assets of the borrowing company.
Note that it is important not to confuse the term ‘debt security’, which is a type of debt, with the
term ‘security for a debt’ which is something that the lender will take over the assets of the borrower in order to protect their interests.
In this element you will consider the different types of debt finance. The next element will explore the various forms of security, what happens if the company becomes insolvent and how and why
security must be registered at Companies House.
1.3 Types of debt finance – loan facilities
Loan facility: A loan facility is an agreement between a borrower and a lender which gives the
borrower the right to borrow money on the terms set out in the agreement.
Loan facilities include:
* Overdraft: this is an on-demand facility, which means that the bank can call for all of the
money owed to it at any point in time and demand that it is repaid immediately. This makes
overdrafts unsuitable as a long-term borrowing facility.
* Term loan: this is a loan of money for a fixed period of time, repayable on a certain date. The
lender cannot demand early repayment unless the borrower is in breach of the agreement. The
lender will receive interest on the loan throughout the period.
* Revolving credit facility: this is where the borrower has flexibility to borrow and repay. It allows
a company to draw down money, repay it and then re-draw it down again, then repay it.
1.4 Types of debt finance – debt securities
Debt securities have similarities to equity securities as they are a means by which the company receives money from external sources. In return for finance provided by an investor, the company issues a security acknowledging the investor’s rights. The security is a piece of paper
acknowledging the debt, which can be kept or sold onto another investor. At the maturity date of
the security, the company pays the value of the security back to the holder
Debt Security as Bonds
A classic example of a debt security is a bond. Here the issuer (the company) promises to pay the
value of the bond to the holder of that bond at maturity. The company also pays interest at particular periods, usually biannually.
Bonds are issued with a view to being traded.
The market on which bonds may be traded is known as the capital market. Whoever holds the bond on maturity will receive the value of the bond back from the issuer. Private companies can only issue bonds to targeted investors and not to the
public indiscriminately. To do otherwise risks contravention of s 755 CA 2006.
1.5 The main debt finance documents
Term sheet: This is a statement of the key terms of the transaction (eg loan amount, interest rate, fees to be
paid, key representations, undertakings and events of default to be included in the loan agreement/bond terms and conditions) agreed by the lender and borrower. The term sheet is
equivalent to heads of terms in other transactions. It is not intended to be a legally binding document, rather a statement of the understanding on which the parties agree to enter into the transaction
Loan agreement: The loan agreement sets out the main commercial terms of the loan such as amount of interest, dates on which interest will be paid, the date(s) on which principal needs to be repaid and any
fees due. It will also include most of the other information from the term sheet but in much more detail. The loan agreement is one of the most heavily negotiated documents in a debt finance transaction.
Security document: If a loan is secured, a separate security document will be negotiated and entered into.
1.6 Debentures
Debenture: The word debenture has two separate meanings:
(a) Under s 738 ‘debenture’ covers any form of debt security issued by a company, including debenture stock, bonds and any other securities of a company, whether or not constituting a charge on the assets of the company.
(b) A debenture is also the name of the particular document which creates a security. It is in this
context that the term is generally used. The debenture is a separate document from the loan agreement. The loan agreement sets out the terms of the loan, and the debenture sets out the details of the security.
1.7 Important terms in loan agreements
Representations: Representations, usually referred to as representations and warranties, are statements of fact as to legal and commercial matters made on signing of the loan agreement and repeated periodically during the life of the loan.
Undertakings: Undertakings (or covenants) are promises to do (or not do) something, or to procure that
something is done (or not done).
Event of default: Representations and undertakings are important clauses. Breach of either gives the bank
contractual remedies where the breach constitutes an event of default. The events of default
clause is vital in terms of giving the bank the power to call in its money early if the borrower shows
signs of becoming an enhanced credit risk.
1.8 Summary
- Types of debt finance include loan facilities and debt securities.
- A loan facility is an agreement between a borrower and a lender which gives the borrower the
right to borrow money on the terms set out in the agreement. - Loan facilities are classed as either term loans or overdrafts.
- Debt securities eg bonds have similarities to equity securities as they are a means by which
the company receives money from external sources. In return for finance provided by an
investor, the company issues a security acknowledging the investor’s rights. The security is a
piece of paper acknowledging the debt, which can be kept or sold onto another investor. At the
maturity date of the security, the company pays the value of the security back to the holder. - The main documents required for a term loan are a term sheet, a loan agreement and a
security document (if the loan is to be secured).
- Security (Protecting the creditors)
2.1 The nature of security
‘Security’, in this context, means temporary ownership, possession or other proprietary interest in an asset to ensure that a debt owed is repaid (ie collateral for a debt). The main benefit of taking security is to protect the creditor in the event that the borrower enters into a formal insolvency procedure.
It is possible to improve the priority of a debt by taking security for it. It should not normally be necessary to enforce security if the borrower is still able to pay, although in some circumstances enforcing security may be a simpler way of obtaining repayment than suing the borrower.
The following are all forms of security.
2.1.1 Pledge
The security provider (usually the borrower or occasionally another company in the borrower’s
group) gives possession of the asset to the creditor until the debt is paid back. Pawning a watch or an item of jewellery is a form of pledge.
2.1.2 Lien
With a lien, the creditor retains possession of the asset until the debt is paid back. An example is
the mechanic’s lien. This arises by operation of law and allows a mechanic to retain possession of
a repaired vehicle until the invoice is paid.
2.1.3 Mortgage
With a mortgage, the security provider retains possession of the asset but transfers ownership to
the creditor. This transfer is subject to the security provider’s right to require the creditor to transfer the asset back to it when the debt is repaid.
This right is known as the ‘equity of redemption’. A type of mortgage (known as a charge by way of legal mortgage) is usually taken
over land (although, unusually, ownership will remain vested in the security provider in this case).
2.1.4 Charge
As with a mortgage, the security provider retains possession of the asset. However, rather than
transferring ownership, a charge simply involves the creation of an equitable proprietary interest
in the asset in favour of the creditor.
As well as this equitable proprietary interest, the charging document will give the lender certain contractual rights over the asset – for example to appoint a receiver or administrator to take possession of it and sell it (or, exceptionally, to take possession of it itself to sell), if the debt is not
paid back when it should be. There are two types of charge: fixed charges and floating charges. From a creditor’s perspective, fixed charges are generally a better form of security, but not all assets are suitable for charging by way of fixed charge.
2.2 Fixed and floating charges
There are two different types of security that a company may offer a lender over its assets: fixed
and floating charges. A fixed charge prevents the borrower from dealing with the assets subject to the charge and is the strongest form of security. A lender will normally seek a fixed charge where possible.
A floating charge ‘floats’ over a class of assets. It does not prevent the borrower from dealing with these assets unless and until the floating charge ‘crystallises’, which usually happens when the borrower defaults on the loan repayments. The label applied to a charge is not always determinative – it is necessary to look at the terms of the charge itself (Agnew v IRC [2001] 2 BCLC 188, PC). We will consider these types of charges in more detail below
2.3 Fixed charges
Where a fixed charge is granted, the lender will control the borrower’s use of the charged asset. The company cannot deal with (dispose of or create further charges over) the assets subject to the charge without the consent of the lender. A lender will normally want a fixed charge as it offers greater protection for the lender but this is not always appropriate; it will depend on the type of assets charged.
It may not be appropriate for the lender to have control over particular assets such as stock and raw materials which the borrower will need to use on daily basis in the course of its business to generate income to meet its liabilities, including the loan interest and repayment amounts. Fixed charges are generally taken over assets such as plant and machinery.
If the charge becomes enforceable, the lender has the ability to appoint a receiver and exercise a power of sale over that asset. Ashborder BV v Green Gas Power Ltd [2004]: The court said that the prevention of the chargor from freely disposing of the asset is crucial to the creation of a fixed charge.
2.4 Floating charges
Many companies are unable to grant fixed charges over the majority of their assets. For example,
a trading company needs to be able to continually dispose of its stock. If the stock was subject to a fixed charge, the company would be unable to dispose of it. For assets that cannot be subject to a fixed charge, a floating charge is appropriate.
A floating charge floats over a class of asset which fluctuates eg stock, raw materials. Whatever assets in that class the borrower owns at any point in time are subject to the floating charge. A floating charge does not give the lender control over the assets. The borrower may freely
dispose of such assets unless and until the floating charge ‘crystallises’.
The key case on floating charges is Re Yorkshire Woolcombers Association [1904] AC 355
Key case: Re Yorkshire Woolcombers Association [1904] AC 355
Re Yorkshire Woolcombers Association [1904] AC 355 defined a floating charge as a charge over: A class of assets, present and future; and
* Which in the ordinary course of the company’s business changes from time to time; and
* It is contemplated that until the holders of the charge take steps to enforce it, the company
may carry on business in the ordinary way as far as concerns the assets charged.
2.5 Floating charges: crystallisation
When a floating charge crystallises, it ceases to float over all of the assets in a class and instead fixes onto the assets in the class charged at the time of the crystallisation. The lender then has control of those assets and the borrower is unable to deal with these assets, as if the assets were
subject to a fixed charge.
Whilst the effect of crystallisation on preventing the borrower dealing with assets subject to a floating charge is the same as for a fixed charge, the assets subject to crystallisation of the floating charge are not treated as fixed charge assets for distribution
purposes on a winding up.
If the company receives more assets of the same class after crystallisation, these assets are automatically subject to the crystallised charge (NW Robbie and Co v Whitney Warehouse Co Ltd [1963] 1 WLR 1324, CA).
Crystallisation occurs in the following situations:
(a) Common law – on a winding up, appointment of a receiver or cessation of business.
(b) Specified event – as defined in the loan agreement. This usually occurs where a borrower
defaults on the loan repayments or interest payments, or where another lender enforces their
security.