Chapter 121

Question 1

Bob says that too much clutch pedal freeplay can cause the clutch to slip during acceleration.

Answer 1

False

Question 2

Bob says that too little clutch pedal free play can cause the clutch to slip.

Answer 2

True

Question 3

The asian speed increases when the driver depresses the accelerator pedal and releases the clutch pedal, but the vehicle does not move. Bob says the clutch may be defective.

Answer 3

True

Question 4

The agent speed increases when the driver depresses the accelerator pedal and releases the clutch peddle with the vehicle does not move the Bob says The dual mass flywheel may be defective.

Answer 4

True

Question 5

In growling noise is heard only when the driver exhorts force on the clutch pedal no noise is heard when clutch pedal is up. Bob says the pilot bearing is defective

Answer 5

false

Question 6

A growling noise is heard only when the driver exerts force on the clutch pedal no noise is heard when the clutch pedal is up Bob says the input shaft bearing is defective.

Answer 6

False

Question 7

Which part does not rotate when the engine is running and the clutch is depressed

Answer 7

Clutch disc

Question 8

The clutch pedal freeplay is less than specifications. Bob says that the clutch may slip during hard acceleration.

Answer 8

True

Question 9

The clutch pedal free play is less than specifications. Bob says that the clutch will grab when the clutch pedal is close to the floor when the clutch is engaged.

Answer 9

False

Question 10

What part is often not used on a front wheel drive vehicle with a manual transaxle?

Answer 10

Pilot bearing

Question 11

Most hydraulic clutch systems use what hydraulic fluid.

Answer 11

dot 3

Question 12

A clutch is chattering when engaged, Bob says that too much clutch free play is the cause.

Answer 12

False

Question 13

He clutches charing one engaged Bob says that oil or grease may be on the friction disc

Answer 13

True

Question 14

A manual transmission is difficult to shift or get into gear, especially reverse. Bob says that the clutch may not be fully released.

Answer 14

True

Question 15

A manual transmission is difficult to shift or get into gear, especially reverse. Bob says that too much clutch pedal free play could be the cause.

Answer 15

True

Question 16

To bleed, a hydraulic clutch Bob says to open the bleeder and allow the fluid to gravity bleed.

Answer 16

True

Question 17

To bleed a hydraulic clutch, Bob says to have an assistant slowly depress the clutch pedal as the bleeder valve is opened at the slave cylinder to bleed the air out of the system.

Answer 17

True