CH04 A320 Communications Flashcards

1
Q

COMM_002

Describe the Flight, Cabin, and Service Interphone systems.

o Flight Interphone System:

▪ Permits communication between:

  • ________
  • _____ _____
  • ___ _______
  • ______ personnel connected at the ______ Power Panel

▪ Requires use of the ___ (______ keys & ______ knobs) controls on the Audio Control Panels (ACP).

A

COMM_002

Describe the Flight, Cabin, and Service Interphone systems.

o Flight Interphone System
▪ Permits communication between:

• Captain
• First Officer
• 3rd Occupant
• Ground
personnel connected at theExternal Power Panel

▪ Requires use of the INT (Transmission keys & Reception knobs) controls on the Audio Control Panels (ACP).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

COMM_002

Describe the Flight, Cabin, and Service Interphone systems.

o Cabin Interphone System

▪ Permits communication between the____ ____ and ______.

▪ Requires the use of the ____ (______ key & ______ knob) controls on the Audio Control Panels (ACP).

A

COMM_002

Describe the Flight, Cabin, and Service Interphone systems.

o Cabin Interphone System

▪ Permits communication between the flight deck and cabin.

▪ Requires the use of the CAB (Transmission key & Reception knob) controls on the Audio Control Panels (ACP).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

COMM_002

Describe the Flight, Cabin, and Service Interphone systems.

o Service Interphone System

▪ Permits communication between the ____ _____ and the numerous _____ maintenance receptacles.
▪ Requires the use of the ____ (______ key & _______ knob) controls on the Audio Control Panels
(ACP).

A

COMM_002

Describe the Flight, Cabin, and Service Interphone systems.

o Service Interphone System

▪ Permits communication between the flight deck and the numerous exterior maintenance receptacles.
▪ Requires the use of the CAB (Transmission key & Reception knob) controls on the Audio Control Panels
(ACP).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

COMM_003-1

Recall the purpose of the Radio Management Panels (RMPs).

Used to select and tune all:

______ radios,

______ and

______ navigation radios.

A

COMM_003-1

Recall the purpose of the Radio Management Panels (RMPs)

Used to select and tune all:

communication radios,

SELCAL and

standby navigation radios.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

COMM_003-2

Recall the purpose of the Audio Control Panels (ACPs).
▪ __________ of radios and interphone system for ______ and ______

▪ Control of reception ________
▪ Transmission on the ___ ____ (__) system
▪ Filtering of _____ _____ _____ from ______ reception.

A

COMM_003-2

Recall the purpose of the Audio Control Panels (ACPs).

Selection of radios and interphone system for transmission and reception

▪ Control of reception volume
▪ Transmission on the Public Address (PA) system
▪ Filtering of Morse code signals from NAVAID reception.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

COMM_003-3

Recall the function of each position of the INT/RAD switch:

o INT – allows ___-____ (“___ ___”) transmission on the ______ ______ system through a _____ _____ or _____ ______ microphone.
o Neutral – requires the use of a ______ ______ for transmission.
o RAD (____-____) – allows transmission for the _______ transmission key .

A

COMM_003-3

Recall the function of each position of the INT/RAD switch

o INT – allows hands-free (“hot mic”) transmission on the Flight Interphone system through a headset boom or oxygen mask microphone.
o Neutral – requires the use of a sidestick trigger for transmission.
o RAD (Spring-Loaded) – allows transmission for the selected transmission key .

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

COMM_004

Recall the function of the AUDIO SWITCHING selector.

o Permits selection of ___ __ by either pilot in the event their respect ACP has ______.

o When CAPT 3 or F/O 3 has been selected, “____ __ ____” appears on the memo section of the ____.

NOTE: Use of ACP 3 does not affect either ______ operation

A

COMM_004

Recall the function of the AUDIO SWITCHING selector.

o Permits selection of ACP 3 by either pilot in the event their respect ACP has failed.

o When CAPT 3 or F/O 3 has been selected, “AUDIO 3 XFRD” appears on the memo section of the E/WD.

NOTE: Use of ACP 3 does not affect either RMP’s operation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

COMM_005

Recall the indications when receiving a transmission from SELCAL:

o SELCAL:
▪ _____ flashes in amber _____ the respective communication radio transmission keys

(VHF 1/2/3 or HF 1/2).

▪ _______ sounds on flightdeck

A

COMM_005

Recall the indications when receiving a transmission from SELCAL:

  • *o SELCAL:**
  • *▪ CALL** flashes in amber within the respective communication radio transmission keys

(VHF 1/2/3 or HF 1/2).

Buzzer sounds on flightdeck

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

COMM_005

Recall the indications when receiving a transmission from Mechanic:

Ground call from the ____ _____ ____

▪ _____ flashes in _____ within the ____ transmission keys.

▪ _____sounds on flightdeck.
▪ Light goes off after ___ seconds if it is not reset.

A

COMM_005

Recall the indications when receiving a transmission from Mechanic:

Ground call from the External Power Panel

MECH flashes in amber within the INT transmission keys.

Buzzer sounds on flightdeck.
▪ Light goes off after 60 seconds if it is not reset.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

COMM_005

Recall the indications when receiving a transmission from Cabin Crew:

o CabinCrew:
▪ ___ flashes in _____ within the ___ transmission keys.

▪ ____ sound on the flightdeck.
▪ Light goes off after ___ seconds if it is not reset.

NOTE: Pressing the _____ key on the ACP will extinguish a flashing CALL, MECH, or ATT light.

A

COMM_005

Recall the indications when receiving a transmission from Cabin Crew:

o CabinCrew:
ATT flashes in amber within the CAB transmission keys.

Buzzer sound on the flightdeck.
▪ Light goes off after 60 seconds if it is not reset.

NOTE: Pressing the RESET key on the ACP will extinguish a flashing CALL, MECH, or ATT light.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

COMM_006

Recall how flightdeck oxygen mask microphones are activated:

o Activation:
▪ Occurs by _____ the mask’s storage compartment’s ____-hand door.

▪ A white ___ ___ flag indicates that the _______ is enabled.

A

COMM_006

Recall how flightdeck oxygen mask microphones are activated:

o Activation:
▪ Occurs by opening the mask’s storage compartment’s left-hand door.

▪ A white OXY ON flag indicates that the microphone is enabled.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

COMM_006

Recall how flightdeck oxygen mask microphones are de-activated:

o De-activation:

▪ Occurs by _____ the respective compartment’s_____-hand door, and then
pressing the ____ ___ ____ and ____ button.

NOTE: Oxygen mask microphones are ______ for the Captain’s, First Officer’s, and 3rd occupant’s oxygen masks.

The ____ occupant’s oxygen mask microphone is ____ operational.

A

COMM_006

Recall how flightdeck oxygen mask microphones are de-activated:

o De-activation:

▪ Occurs by closing the respective compartment’s left-hand door, and then pressing the

PRESS TO TEST AND RESET button.

NOTE: Oxygen mask microphones are available for the Captain’s, First Officer’s, and 3rd occupant’s oxygen masks.

The 4th occupant’s oxygen mask microphone is not operational.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

COMM_007

Describe the two methods of making a Public Announcement (PA).

▪ Using the ______ mounted at ___ of the _____ pedestal.
▪ Pressing and holding the __ transmission key on the ___, and speaking into a ____ ____ or _____ _____ microphone.

A

COMM_007

Describe the two methods of making a Public Announcement (PA).

▪ Using the handset mounted at rear of the center pedestal.
▪ Pressing and holding the PA transmission key on the ACP, and speaking into a headset boom or oxygen mask microphone.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

COMM_008

Explain the controls on the overhead CALLS panel.

o ATTND ADV pb – ____ used by DAL

o MECH pb:

▪ COCKPIT CALL light illuminates on the ____ ____ _____.

▪ ______ horn sounds at the _____ of the aircraft.

A

COMM_008

Explain the controls on the overhead CALLS panel.

o ATTND ADV pb – NOT used by DAL

o MECH pb:
▪ COCKPIT CALL light illuminates on the external power panel.

External horn sounds at the nose of the aircraft.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

COMM_008

Explain the controls on the overhead CALLS panel.

o FWD pb:
▪___/____ chime sounds at the _____ section of the cabin and ______ CALL appears at the ______ Flight Attendant panel.

o AFT pb:
▪ ___/____ chime sounds at the _____ section of the cabin and _____ CALL appears at the _____ Flight Attendant panel.

A

COMM_008

Explain the controls on the overhead CALLS panel.

o FWD pb:
High/low chime sounds at the forward section of the cabin and CAPTAIN CALL appears at the forward Flight Attendant panel.

o AFT pb:
High/low chime sounds at the aft section of the cabin and CAPTAIN CALL appears at the aft Flight Attendant panel.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

COMM_008

Explain the controls on the overhead CALLS panel.

o EMER pb:

▪ ____ in white and ____ in amber flash within the pb.
▪____/____ chime sounds ____ times throughout the cabin.

▪ _______ CALL appears on ___ Flight Attendant panels.

A

COMM_008

Explain the controls on the overhead CALLS panel.

o EMER pb:

ON in white and CALL in amber flash within the pb.
High/Low chime sounds three times throughout the cabin.

EMERGENCY CALL appears on all Flight Attendant panels.

17
Q

COMM_009

Explain the function of the controls on the RCDR panel.

o GND CTL pb:

▪ ON (____) - Cockpit Voice Recorder (CVR) and Digital Flight Data Recorder (DFDR) are ______ recording.

▪ AUTO (_____) - the CVR & DFDR ______ start recording with _____ ______ ______.

A

COMM_009

Explain the function of the controls on the RCDR panel.

o GND CTL pb:

▪ ON (blue) - Cockpit Voice Recorder (CVR) and Digital Flight Data Recorder (DFDR) are actively recording.

▪ AUTO (lights out) - the CVR & DFDR automatically start recording with first engine start.

18
Q

COMM_009

Explain the function of the controls on the RCDR panel.

o CVR ERASE button

-______ the CVR tape if the button is pressed for a _____ time provided:

Aircraft is on the ______

Parking brake is ______.

A

COMM_009

Explain the function of the controls on the RCDR panel.

o CVR ERASE button -

Erases the CVR tape if the button is pressed for a brief time provided:

Aircraft is on the ground

Parking brake is on.

19
Q

COMM_009

Explain the function of the controls on the RCDR panel.

o CVR TEST button

  • Tests the CVR provided:
    • ___ ____ pb is selected ____
  • Parking brake is ___.
  • ___ _____ tone is heard through the flight deck _______ which indicates a ________ test.
A

COMM_009

Explain the function of the controls on the RCDR panel.

o CVR TEST button - Tests the CVR provided:
GND CTL pb is selected ON

  • Parking brake is set.
  • Low frequency tone is heard through the flight deck loudspeaker which indicates a successful test.
20
Q

EXTRA LMS COMM01

The two Cabin Intercommunication Data System (CIDS) computers electronically control all of the following, EXCEPT:

A The PA system.

B VHF radios.

C Lavatory smoke indications.

D Flight, cabin, and service interphone.

A

EXTRA LMS COMM01

The two Cabin Intercommunication Data System (CIDS) computers electronically control all of the following, EXCEPT:

A The PA system.

B VHF radios.

C Lavatory smoke indications.

D Flight, cabin, and service interphone.

21
Q

EXTRA LMS COMM 12

The CVR operates automatically:

A For the first 5 minutes after AC power is applied to the aircraft.

B When the first engine is started.

C Anytime the aircraft is airborne.

D All of the above.

A

EXTRA LMS COMM 12

The CVR operates automatically:

A For the first 5 minutes after AC power is applied to the aircraft.

B When the first engine is started.

C Anytime the aircraft is airborne.

D All of the above.