CG AMT Aircraft Maintenance Flashcards
Who can delete EAL discrepancy?
Maintenance Release Authority
R3 report that tracks Serial Component Failures?
Who can defer corrosion discrepancies?
AEO
How often is corrosion training given to maintenance personnel?
Biannually
When is a corrosion report sent?
Annually, but NLT March 1st
Wash Rack water temperature?
120-140F
Dehumidifier can reduce Relative Humidity to…?
40%
What is the Maximum DELAY for a successful event/flight?
UNDER 15 minutes
Where do you use local time in ALMIS
Flight Schedule
Who do you contact about GSE failures?
ALC SE / JDRS
What is the purpose of LCI?
Communication
How many RCM groups?
(Reliability Centered Maintenance)
4
How many days until a TCTO turns into a SCTO?
180 days
What are the basic elements of ALMIS?
ACMS and AMMIS
How many subcategories or ACMS?
3 : ACMS, MSR, SR
Which local time is used in ALMIS
Zulu
PPM limit for water in fuel
10ppm
How many quarts of fuel do you drain before taking a sample?
2 quarts
Deadman stick overflow
No more than 5% of actual flow rate from time stick release until it stops
Authorized fuel on a ship?
JP-5
Free water test kit?
Digital Free Water Detector
How long are Completed weight and balance forms kept?
Records will be kept until the next W&B recertification
How many days allowed for an urgent CG22
7 days
RCM is based on what manual?
SAE JA1011
How many consequences of failure in RCM?
Four
In RCM, what type of failure has no direct impact?
Hidden
Who designates a unit corrosion team members?
AEO / UCPM
Temperature to cure resin?
Typically, above 180F max 210F
What is the scarf ratio overlap?
Amount of overlap in inches per ply, depends on ply thickness
What is used to pressure test a fuel tank?
Manometer
What is used to clean flight control cables?
MIL PRF 680 Type II
What manual gives you permission to pressure test low pressure hydraulic lines?
NAVAIR 01-1A-20 // AFTO 42E-1-1-1
What is it called when you remove fumes from fuel tank?
Purge
How far out do you remove paint for inspection of damaged composite?
2in beyond repair area
What type of drill bit used for composite material?
CARBIDE TIP
What does “R” mean for a bolt or screw parry number?
Recessed head
Maximum depth of moderate corrosion?
10 Mils