Casualty Control

Question 1

What actions should be taken in the event of a major flammable liquid leak?

Answer 1

1. Notify watchstander (call MILPOL) 9-5555
2. Take Initial Action
   A. Secure machinery
   B. Wipe up liquids
   C. Use AFFF to wash the bilge
3. If needed set main space/set box/take muster/wait for fire party

Question 2

What actions should be taken in the event of a loss of control air pressure?

Answer 2

1. Notify watchstander
2. Secure compressed air isolation valve
3. Secure control air isolation valve
4. Restart air compressor if electrical control has tripled offline

Question 3

What actions should be taken in the event of a class C fire in the switchboard?

Answer 3

1. Notify the watchstander (call milpol)
2. Secure 24V power to switchboard
3. Ensure shoretie breaker is secured on pier (radio watchstander)
4. Secure generators
5. Should an EEBD
6. Use CO2 extinguisher
7. If needed set main space/set box/take muster/wait for fire party.

Question 4

What actions should be taken in the event of a a class C fire in the SSDG?

Answer 4

1. Notify watchstander (call milpol)
2. Secure affected SSDG
3. Ensure SSDG circuit breaker is open
4. Ensue 120v condensation heater is open
5. Shoulder an EEBD
6. Use CO2 extinguisher
7. If needed set main space/set box/take muster/wait for fire party.

Question 5

What actions should be taken in the event of a SSDG overheating?

Answer 5

1. Notify watchstander (call milpol)
2. If temp so above 225 secure effected generator.
3. Reduce the load.

Question 6

What actions should be taken in the event of a SSDG overheating?

Answer 6

1. Notify watchstander (call milpol)
2. If temp is above 225 secure effected generator.
3. Reduce the load
4. Check for system intact
5. Bring up off-line generator
6. Parallel generators
7. Place load on unaffected generator
8. Place affected generator in idle
9. Report system status
10. If needed set main space/set box/ take muster/ wait for fire party

Question 7

What actions should be taken in the event of an unusual noise or vibration in SSDG?

Answer 7

1. Notify watchstander (cool milpol)
2. Identify effected engine
3. Secure effected engine
4. Check system intact
5. Report system status
6. If needed set main space/set box/take muster/wait for fire party.

Question 8

What actions should be taken in the event of a loss of lube oil pressure K the SSDG?

Answer 8

1. Notify watchstander (call milpol)
2. Secure effected engine
3. Open the generator circuit breaker
4. Report system status
5. If needed set box/main space/ take mister/ wait for fire party.

Question 9

What actions should be taken in the event of a loss of fuel oil pressure in SSDG?

Answer 9

1. Notify watchstander (call milpol)
2. Secure effected engine
3. Open the generator circuit breaker
4. Report system status
5. If needed set main space/set box/take muster/ wait for fire party

Question 10

What action should be taken in the event of a SSDF governor malfunction?

Answer 10

1. Notify watchstander
2. Open bus tie breaker
3. Secure effected generator
4. Open SSDG circuit breaker

Question 11

What actions should be taken in the event of a toxic gas leak?

Answer 11

1. Notify the watchstander (call milpol)
2. Set the Toxic Gas Bill
3. Secure the space
4. Take a muster
5. Don SCBA and investigate

Question 12

What actions should be taken in the event of a SSDG overload?

Answer 12

1. Strip the electrical load
     A. Start with non-vitals (white)
     B. Next are the semi-vitals 
          (Yellow)
     C. Last are the vitals (red). Require EO's
          Permission 
2. If needed secure the SSDG