ATA 79 GE Flashcards
Where is located DMS sensor
a On the oil tank
b On the oil pump
c On the gearbox
A
Where can you read OFDP
a Engine maintenance page
b Engine performance page
c Condition monitoring display on MAT/PMAT
C*
Where is located DMS conditioner
a Left side of fan case above engine oil tank
b Right side of fan case above engine oil tank
c Left side of fan case below engine oil tank
A
Which sensor sends direct data to AIMS
a Oil pressure sensor
b Oil temperature sensor
c Oil quantity sensor
C
Engine oil from oil pump will go through the following components before entering bearing compartments (B1)
a. Oil filter – Fuel/Oil HX – Oil/Oil HX
b. Oil filter – Air/Oil HX – Oil/Oil HX
c. Oil filter – Oil/Oil HX – Fuel/Oil HX
A
The anti-leak valve prevents the flow of engine oil (B1)
a. From oil tank to bearing compartments when engine is shutdown
b. From oil pump to oil tank when engine is shutdown
c. From oil tank to oil pump when engine is shutdown
C
DMS air/oil separator and sensor are located (B1)
a. On fan case
b. On top of oil tank
c. On accessory gearbox
B
Oil tank air pressure is controlled by (B1)
a. Pressure relief valve
b. Ambient vent valve
c. DMS air/oil separator
C
The damping oil for bearing 3R and 5R is the oil (B1)
a. After Fuel/Oil HX
b. Returned to oil pump from Fuel/Oil HX
c. Before Fuel/Oil HX
A
Oil pressure is measured after (B1)
a. Oil/Oil HX
b. Fuel/Oil HX
c. Oil pump
A
The condition of main oil filter element is monitored by (B1)
a. DMS sensor
b. A differential pressure sensor
c. A differential pressure switch
B
