APU Flashcards
1
Q
If the APU fuel pump fails prior to APU start, the:
- Left Tank Aux pump provides fuel boost pressure
- APU starts and continues normal operation
- APU rpm fluctuates
- ESU will prevent the APU from starting
A
- ESU will prevent the APU from starting
2
Q
APU automatic shutdown will occur when the Battery Master switch is in the “Battery Master” position and any one of the following events occur: (There may be more than one correct response)
- APU Fire
- Rearbay overheat
- When the aircraft becomes airborne
- APU Overspeed
A
- APU Fire
- Rearbay overheat
- When the aircraft becomes airborne
- APU Overspeed
3
Q
APU Fire protection:
- Is provided by one fire extinguisher automatically, provided the battery master switch is in the “Battery Master” position
- Is provided by one fire extinguisher automatically with a manual backup
- Is provided by one fire extinguisher automatically, provided the battery master switch is in the “Battery Master” position with a manual backup
- Is provided by two fire extinguishers and must always be manually activated
A
- Is provided by one fire extinguisher automatically, provided the battery master switch is in the “Battery Master” position with a manual backup
4
Q
Fire deck indications of an APU fire are: (there may be more than one correct answer)
- “FIRE” warning light on the APU fire protection panel (overhead)
- Illumination or both glareshield “ENGINE FIRE PRESS TO RESET” push lights
- Fire bell
- “APU” caution light and “CHECK FIRE DET” warning light
A
- “FIRE” warning light on the APU fire protection panel (overhead)
- “APU” caution light and “CHECK FIRE DET” warning light
5
Q
The APU fuel supply is:
- Supplied from the left fuel tank collector bay, under gravity pressure to the APU boost pump
- Independent of the main fuel tank system
- Supplied from the left fuel tank collector bay, under gravity pressure to the APU
- Supplied by the right tank boost pump
A
- Supplied from the left fuel tank collector bay, under gravity pressure to the APU boost pump
6
Q
The APU start circuits are armed when the:
- FLR light goes off
- START switchlight is pushed
- APU PWR switchlight is pushed and controlled by the ESU
- APU PWR switchlight is pushed and controlled by the started gen GCU
A
- APU PWR switchlight is pushed and controlled by the ESU