Annex C Study Guide Flashcards
instructor operator duties
- equipment operator (know all controls, indicator, displays, instructional features, and procedures necessary for equipment operation.
- perform operator level hardware maintenance
- I/O must understand how to effectively use the LAV-25 AGTS for crew training.
During training at the beginning of a crew exercise, how many rounds are in the ready boxes and stowed in a normal load per exercise?
150 HE/ 300 stowed
60 AP /120 stowed
400 COAX/1200 stowed
Maneuver Box for Scaled Range
vehicle speed 10mph
target exposure time: 45 seconds
scale: 1/5
10mph/ 1/5= 2 mph (Scale Range)
2mph x 0.44704= 0.89408 mps
0.89408 mps x 45 seconds=40.2336m
40.2336m = ^41 m
Write out the definition of the following malfunctions symbols DS, GP, NB.
DS=Day Sight Failure, GP=Gunners Control Handle Failure, NB=Nuclear Biological Chemical (NBC).
During system operation, the temperature of the training site area must be maintained between ___ degrees F and ___ degrees F ( ___ degrees C and ___ degrees C) with a relative humidity of ___ to ___
61F - 79F
16C - 26C
30 - 70%
What is the login username for the Platoon Sergeant when conducting a platoon mode training?
“member”
How many exercises can be stored with each crew record ?
100
what are the types of target response?
Fall; Bob; Hold
A small scale type range is used for __________, section, and platoon firing exercise.
Stationary Single Vehicle.
Why cant precision gunnery be evaluated on any range less than 1/2 scale?
the flat trajectory of the round at short distance
What does the Crew Instructions Display Page provide?
It provides the crew with a task ,condition, and standard.
The precision gunnery manipulation exercise is designed to evaluate each crew members ability, acting as a gunner, to properly ______ and ______ a frontal and flank targets at _______ ranges.
Range. Aim. Varied.
sustainment gunnery table X-1
table X-I is used to sustain the training of the commander and the gunner in the fundamentals of direct fire adjustments.
Small-scale, stationary LAV-25 is used for?
for stationary single vehicle, section and platoon firing exercises
Initial gunnery Exercise 2: Precision Gunnery
Exercise 2 is a precision gunnery manipulation exercise designed to evaluate each crewmember’s ability to perform as a gunner and properly range and aim at frontal and flank targets at varied ranges.
The LAV-25 AGTS is designed for what purpose?
For unit training to sustain gunnery proficiency and critical combat gunnery skills.
Who must first consider the unit’s overall training requirements as directed by the training manager?
I/O
what is bob? (relating to target response)
when the ITM receives a bob-when-hit command, the ITM lowers and then raise the target upon detection of a hit or enough hits to cause a kill.
How many section exercises are there for the AGTS?
40
M240 can be fired on what?
The M240 coaxially-mounted machine gun can be used to fire 1/10, 1/5, 1/2, and full- scale ranges. The M240 coax requires 4,100 meters of impact area.
More realistic training can be conducted on half scale ranges than on ________ ranges.
Smaller Scale
How many advanced gunnery training exercises are there for the AGTS?
84
What is the minimum number of vehicles required to conduct a section exercise?
2 vehicles.
Given the information below, state the length of the maneuver box required for a scaled range (show work) Vehicle Speed - 12 mph Exposure Time - 40 sec Range Scale - 1/5
12/ 1/5 = 2.4 x 0.447021 = 1.072896 x 40 = 42.91584 meters (43 meters)
The precision gunnery manipulation exercise is designed to evaluate each crew members ability, acting as a _________, to properly range and aim at ________ and ________ targets at ___________ ranges.
___________ depends on the sub caliber device and whether ________ engagements are incorporated.