Airlaw (F) Flashcards
Hydraulic and electric activating system of components
airframe major alteration
The state having jurisdiction over the organization responsible for the type of design
State of design
Conversion of an aircraft engine from one approve model to another involving any change in compression ratio propeller reduction gear impeller gear ratios of the substitution of major engine parts which requires extensive work and testing of the engine
powerplant major alteration
Calibration of an instrument
appliance major repair
Overhaul of pressure type carburetors, and pressure type fuel, oil, and hydraulic pumps.
appliance major repair
Special repair to structural engine parts by welding planting metallizing or other method
powerplant major repair
Rewinding the field coil of an electric accessories
appliance major repair
Installation of an accessory which is not approved for the engine
powerplant major alteration
Replacement of fabric on fabric convert parts such as wings fuselage stabilizer and control surface
airframe major repair
Refinishing decorative coating of fuselage, balloon basket, wings tail group surfaces (excluding balanced control surfaces), fairings, cowlings, landing gear, cabin or cockpit interior when removal or disassembly of any primary structure or operating system is not required
preventive maintenance
Change to the empty balance with result in an increase in the maximum certificated weight of center of gravity limits of the aircraft
airframe major alteration
No person may assign nor shall any person maintenance function for aircraft unless that person has had minimum rest period of
8 hours
The alteration of an aircraft aeronautical product in conformity with an approved standard
modification
The splicing of skin sheets
airframe major repair
Making a small simple repair to fairings, nonstructural covers plates, cowling and small patches
preventive maintenance
The state having jurisdiction over the organization responsible for the final assembly of the aircraft engine or propeller
state of manufacture
A certification confirm that the maintenance work to which it relates has been complied with an accordance with an applicable standard of airworthiness using approved data
maintenance release
Complete disassembly of complex hydraulic power valves
appliance major repair
Conversion of any short for the purpose of using fuel of a rating of grade other than that listed in the engine specification
powerplant major alteration
The emotion relieve the person performance function from all duties for 24 consecutive hours during any
7 consecutive days
Change the hub design
propeller major alteration
Calibration of avionics or computer equipment
appliance major repair
Replacement of outer lamitation on fixed pitch wood propeller
propeller major repair
The performance of task required to ensure that continuing airworthiness of an aircraft including anyone of combination of overhaul
maintenance
Replenishing hydraulic fluid in the hydraulic reservoir
preventive maintenance
A simple minor preservation operation and the replacement of a small standard parts not involving complex assembly operation
preventive maintenance
The set of process by which an aircraft engine propeller or parts complies with the acceptable airworthiness requirements and remain in a condition for safe operation through its operation life
continuing airworthiness
Repairing upholstery and the decorative furnishing of the cabin cockpit or balloon basket interior when the repairing does not require disassembly or any primary structure
preventive maintenance
Separation or disassembly of a crankcase or crankshaft of a reciprocating engine equipped with other than spur type propeller reduction gearing
powerplant major repair
The restoration of an aircraft aeronautical product by using method technique and practice acceptable to the authority when it has been disassembled
rebuild
All Philippine registered aircraft shall be weighted at the following periods when used for commercial or aerial work operation every
3 years
Following unscheduled duty periods, the person performing maintenance functions for aircraft shall have a mandatory rest period of
10 hours
Installation of propeller deicing system
propeller major alteration
Skis and ski pedestals
airframe major repair
Shortening of blades
propeller major repair
The restoration of an aircraft aeronautical product using method technique and practice acceptable to the authority including disassembly cleaning and inspection as permitted
overhaul
Repair of deep dents, cuts, scars, nicks, etc. and straitening of aluminum blades
propeller major repair
Change to the basic design of the fuel il cooling heating cabin pressurization electrical hydraulic deicing or exhaust system
airframe major alteration
All Philippine registered aircraft shall be re-weighted at the following periods when used for commercial or aerial work operation every
5 years
The repair of portion of skin sheets by making additional seams
airframe major repair
Any appreciable changes in design of an airframe, power-
plant, propeller, or appliance
Alteration
An aircraft or any component
thereof is an alteration other than a major alteration
Minor alteration
Might cause an appreciable changes in its weight,
balance, structural strength, performance, power-plant operation, flight
characteristics, or other qualities affecting airworthiness, or an
alteration which is not accomplished in accordance with accepted
practices or cannot be performed by means of elementary operations.
Major Alteration
A repair which, if improperly accomplished, would
adversely affect the structural strength, performance, flight
characteristics, power-plant operation, or other qualities affecting
airworthiness, or a repair which is not accomplished in accordance
with accepted practices or cannot be performed by means of
elementary operations.
Major Repair
Simple or minor prevention operation and
the replacement of small standard parts not involving complex
assembly operations
Preventive Maintenance
