360, Pneumatics Flashcards
When is the GND symbol displayed on the SD ECAM BLEED Page?
Whenever the aircraft is on the ground
Only when ground pre-conditioned air is connected
Only when ground high-pressure air is connected
All the time
Whenever the aircraft is on the ground
The Bleed Monitoring Computers (BMCs) command the engine bleed valves to close whenever:
One or more bleed leaks are detected.
Excessive pressure or temperature is detected.
Reverse airflow is detected.
Any of the above.
Any of the above.
Engine and APU bleed air are the only air sources for the pneumatic system.
True
False
False
The pneumatic system is displayed on which SD ECAM page?
PRESS
BLEED
ENG
COND
BLEED
When engines are running, their bleed sources have priority over the APU bleed source and the APU bleed valve automatically closes.
True
False
False
With the X BLEED knob in the AUTO position, the crossbleed valve opens and closes in response to the:
APU bleed valve
HP bleed valve
IP bleed valve
All of the above
APU bleed valve
While in AUTO, the crossbleed valve will also automatically close in response to a bleed leak.
True
False
True
Above what altitude must the APU bleed valve be closed?
20,000ft
30,000ft
10,000ft
17,000ft
20,000ft
The APU bleed valve is spring-loaded to the closed position in the absence of air flow.
False
True
True