300, Ice and Rain Protection Flashcards
When icing conditions exist, when should engine anti-ice be selected on?
Only on the ground.
During all ground and flight operations.
After takeoff.
The engine anti-ice is automatic.
During all ground and flight operations.
The Airfoil anti-ice system provides protection for the following?
The two inboard slats
The three outboard slats
All five leading edge slats
The leading edge slats and horizontal stabilizer
The three outboard slats
Under what ECAM page would you get information about the anti-ice system?
BLEED
ENG
PRESS
COND
BLEED
Which statement is correct regarding rain repellent?
- The aircraft is not equipped with a rain repellent system.
- It can only be used on the ground.
- It can be used in moderate to heavy rain conditions.
- It can only be applied to the Captain`s windshield.
It can be used in moderate to heavy rain conditions.
When will the window and the probe heat come on with the PROBE/WINDOW HEAT pushbutton in the AUTO position?
- When the OAT is 10 degrees C or colder
- The window and probe heat must be selected on after both engines are started
- After takeoff
- After the first engine is started
After the first engine is started
Probe heat can be activated prior to engine start by:
- pressing the PROBE/WINDOW HEAT pushbutton.
- moving the engine switch to IGN/START.
- pressing the WING ANTI ICE switch.
- pressing the ENG ANTI ICE switch.
pressing the PROBE/WINDOW HEAT pushbutton.