Week 5 Deck 2 Flashcards
Fresh water tanks and their locations
Fw tank No1 : 3 Deck, port side, outboard of air purification compartment.
Fw tank No2 : 3 deck port side outboard of cold and cool rooms
Each Fw tank has a differential pressure transducer and the level of each tank is displayed where ?
Fresh water filling station and also in the engine room adjacent to secondary sampling sink.
Transducers for fw tanks input to what system to provide digital indication of the tanks level ?
PMS
Sight glasses are provided on each tank as a back up facility for level indications. Where are they located ?
No1 fw tank sight glass : air purification compartment
No2 fw sight glass : in WSC port aft corner
Fw Filling station location ?
1 deck port aft corner just fwd of 64 WTB
The cold water filling line is fitted with a relief vv set at ?
3.75 bar
Hot water tank location ?
Fwd in EMS
Hot water tank
Filled from ?
Domestic hot water tank relief vv pressure set to ?
Max temp and how it’s controlled ?
1) filled directly from online fresh water tank
2) set to 3.6 bar
3) max temp is 71 degrees and is thermostatically controlled.
ZIP Hydroboil locations ?
JRs mess
SRs mess
Wardroom
AFT escape platform
Health physics lab
Location of FWD hand pump ?
And where does it pump water from
Located by entrance to fresh water filling station.
Pumps from No1 & No2 Fw tanks
AFT hand pump location and where it pumps water from ?
Located in AFT escape compartment and pumps from made water tank.
Two desalination plants locations (RO plants)
what do they do?
and where do they get the sea water from ?
Fwd engine room module on port and stbd sides.
They produce fresh water for consumption by a process called reverse osmosis.
They get sea water from O comp tank.
How are RO plants controlled ?
They are controlled via the local control panel and a remote stop button is provided on the PMS at the CCC and SPC.
(A start button on the LCP initiates the run up of the sequence.)
The fresh water system is split into two seperate systems they are ?
Fresh water cold (FWC)
Fresh water hot (FWH)
Oxygen generation equiptment.
LP electrolysers.
Multi purpose oxygen generator.
Air purification equiptment
CO2 & H2 Burners (x2)
CO2 scrubbers (x2)
Gas management plant (GIMP)
LP electrolysers control
1) normally controlled from ?
2) LPE can be crash stopped from what two locations ?
3) LPE is located where?
4) system code ?
1) locally in the electrolyser compartment
2) by making the emergency stations switch on the SCC and also by a switch outside the electrolyser compartment on 3 deck.
3) located in the electrolyser compartment on 3 deck STBD side below JRs Mess.
4) LPE