Warning Systems

Question 1

What is the highest priority alert message?

Answer 1

Warning (Red)

Question 2

What are the 4 types of EICAS messages?

Answer 2

1-Warning
2-Caution
3-Advisory
4-Memo

Question 3

What RED alert displays are shown on the PFD?

Answer 3

-WINDSHEAR
-PULLUP

Question 4

Can warning messages be cancelled?

Answer 4

NO

Question 5

What does the status cue mean?

Answer 5

A new status message exists on the (secondary EICAS) - displayed in cyan color

Question 6

Which type of EICAS messages are listed in the DDG and provide for dispatch capability?

Answer 6

EICAS status messages

Question 7

Can amber alert messages be cancelled or recalled?

Answer 7

Yes, by pushing CANC or RCL switch

Question 8

When you receive a TCAS RA where do you position the center of the airplane symbol on the PFD?

Answer 8

Outside of the red outline RA pitch regions

Question 9

List some of the configuration conditions that will cuase the CONFIG message to display during takeoff

Answer 9

1-Flaps not in T/O position
2-Body gear not centered
3-Parking brake set
4-Speedbrake lever not in DN detent
5-Stab trim not in takeoff range

Question 10

-8 what PFD message would you receive during a rejected takeoff if speedbrakes not deployed>

Answer 10

RED PFD message SPEEDBRAKE to alert crew

Question 11

-8 During takeoff and landing a BANK ANGLE alert sounds for bank angles as small as _______?

Answer 11

10 degrees

Question 12

What conditions will cause the CONFIG GEAR EICAS warning message?

Answer 12

Any landing gear not down and locked with any of the below conditions:
-any T/L closed, RA less than 800’
-Flaps in ladning position (25 or more)

Question 13

When are master CAUTION lights and beeper inhibited during takeoff?

Answer 13

80 KIAS (ends 400 RA or 20” after rotation, whichever occurs first). If RTO, inhibit ends when airspeed falls below 75 KIAS

Question 14

New predictive windshear warning are inhibited at what airspeed during takeoff?

Answer 14

100 kts, ends at 50’ RA