Bookmarked

Question 1

On -8 how would you deactivate LOC or FAC mode once they have captured?

Answer 1

-Selecting roll mode other than LNAV
-Pushing TO/GA
-Disengaging Autopilot and positioning both F/D OFF

Question 2

-8 When do vertical anticipation cues display?

Answer 2

-Within 25NM of MAP
-With in 60 degrees Final Approach CSE
-Track within 90 degrees of Final Approach CSE
-<6000 feet above field

Question 3

-8 When do IAN scales display?

Answer 3

-LNAV/VNAV not active modes
-Approach is in the active flight plan
-<150NM from destination, or
-<50 NM from T/D, or
-FMC in descent mode

Question 4

On a -400 Legacy FMC, when does approach phase of the FMS start, also known as “on approach logic”

Answer 4

-When initial fix of an approach sequences
-When runway is active waypoint and within 25NM

Question 5

NG FMC “on approach” logic occurs when?

Answer 5

-when any of the below occurs:

-Descent phase, flaps out of up
-First waypoint sequenced of active nav database
-Less than 12NM from destination airport direct to or intercept course-to active waypoint and a manually entered end of descent altitude constraint is lower than the destination airport plus 500’
-The runway or missed approach point is active waypoint and the airplane is within 25nm of the runway