Transmission Service Part B

Question 1

The transmission is often difficult to mate properly with the engine. It is recommended that you pull the two components together with the mounting fasteners.
True
False

Answer 1

False

Question 2

When conducting air pressure tests on an air system, the chassis air pressure must be:
a. 80 psi
b. 90 psi
c. 60 psi
d. 50 psi

Answer 2

b. 90 psi

Question 3

When establishing the buffer zone around a diesel electric hybrid, what is the recommended distance the cones be placed from each corner of the vehicle?
a. 0.5m
b. 1.0m
c. 1.5m
d. 2.0

Answer 3

b. 1.0m

Question 4

When the power electronics carrier is locked out, who is permitted to remove the lockout?
a. shop foreman
b. any technician
c. the shop’s safety captain
d. the technician that installed the lockout.

Answer 4

d. the technician that installed the lockout.

Question 5

What is the minimum length of time permitted to allow the fluid in the accumulator to drain back into the reservoir.
a. 1 minute
b. 3 minutes
c. 5 minutes
d. 10 minutes

Answer 5

c. 5 minutes

Question 6

Identify the conditions that must be met in order to tow a truck safely, without damaging any components.
a.
b.
c..

Answer 6

a. All drive wheels raised clear of the ground.
b. The axel shaft of each drive wheel on the ground must be remove.
c. The drive lines must be connected at the drive axels and the vehicle must be towed using a suitable system attached to manufacturers recommend tow plug.

Question 7

Regulated air is applied to keep the range in low and the splitter in low.
True
False

Answer 7

True

Question 8

When must you inspect insulated rubber gloves?
A. Before each use.
b. weekly
c. monthly
d. annually

Answer 8

a. before each use

Question 9

What medium of stored energy is contained within an accumular?
a. gaseous
b. fluid
c. fluid and gas
d. plasma

Answer 9

c. fluid and gas