Tools 36 Digital in-line gauge

Question 1

The red digital readout will ultimately flash a high pressure alert - “high – P” and when pressure exceeds?

Answer 1

200 psi (201)

Question 2

The blue digital readout will alternately flash high flow alert hi-f water flow exceeds_____

Answer 2

250 gpm (251)

Question 3

The blue digital readout will alternately flash a low flow alert “Lo-F” One water flow is less than___

Answer 3

80 gpm (79)

Question 4

If there has been no water flow for____ minutes, the digital display will go into a sleep mode and not display any readings. The resumption of water flow during the sleep mode will reactivate the digital display automatically.

Answer 4

15 mins

Question 5

If there has been no water flow after ___ minutes, the digital display will power off automatically. If operationsare then resumed, the digital in line gauge will need to be restarted by firmly pressing and holding the ____ on off button for _______ seconds

Answer 5

30 mins; Green; 4-5 seconds

Question 6

The digital in line gauge is powered by a _________ battery

Answer 6

Special 9 V rechargeable lithium ion battery. No other 9 V battery may be used in this equipment.

Question 7

Units will be issued____ batteries.

Answer 7

4. One battery to be installed in the digital in-line gauge. One battery to be kept in the clear battery pouch of the carrying case. Storing only one spare battery in the keys will prevent damage to batteries due to battery terminal cross contact. Two batteries are to be placed in the charging unit at quarters. Units may put identification numbers or letters on batteries in order to track and evenly rotate them. Company commanders shell establish the schedules that will facilitate this battery rotation

Question 8

A fully charged battery will supply approximately ___hours of continuous operation. After ____hours of usage the digital readout will _____flash “Lo-batt.” This is an indication that approximately ___minutes of battery life remain. If a slowly flashing low bat is displayed, the battery shall be swapped out when?

Answer 8

5 hours; 3.5 hours; slowly; 99 mins; At the conclusion of the operation

Question 9

When____ minutes of battery life remains, the digital readout will flash “Lo batt.” If a rapidly flashing “Lo batt” is displayed the battery shall be swapped out with the replacement in the caring case when?. This can be done when water is flowing.

Answer 9

10 minutes; as soon as possible

Question 10

Condition of the battery installed in the gauge is to be checked ______ using this battery test function.

Answer 10

Each tour; a battery in serviceable condition will display as BATT good

Question 11

Battery should be rotated and re-charged _____and_____

Answer 11

Weekly; and after use. Remove the batteries from the digital in line gauge and the carry case. Rotate them with batteries from the charging unit two and two out.

Question 12

The battery charger indicator is a _____color, the inserted battery is charging

Answer 12

Red

Question 13

A steady what color indicates a fully charged battery. Hey slowly blinking what color indicates a defective battery that must be replaced

Answer 13

Steady green equals fully charged. Slowly blinking red equals defective battery.

Question 14

The digital in-line gauge should be inspected for damage and operability when?

Answer 14

Each tour

Question 15

If the digital in line Gage needs to be placed out of service, or replacement batteries are required, do what?

Answer 15

Complete form RT2 and notify the fire tools and equipment unit at 718-391–9405