38 Blitzfire Oscillating Monitor

Question 1

The blitz fire portable model offers an exclusive ____degree low attack angle, ____degree side to side horizontal movement, and a rear pivoting inlet that for Added stability.

Answer 1

10° low; 20° side to side

Question 2

The isolation feature provides an automatic ___,___ Or ___degree sweep, and can easily be overridden for manual operation.

Answer 2

20; 30; or 40° sweep

Question 3

Can foam nozzles be used with the Blitz fire?

Answer 3

Yes. The blitz fire portable monitor offer us a choice of a master stream fog nozzle or a stacked smoothbore tips. Phone nozzles may be used with the blitz fire

Question 4

The blitz fire is designed for a maximum inlet pressure of___ psi

Answer 4

175 psi. Do not exceed this pressure

Question 5

The blitz fire has a pivoting inlet and a pivoting outlet, both of which have a_____Fdny thread

Answer 5

2 1/2”

Question 6

Horizontal stream range when stationary is_____Degrees either side of centerline

Answer 6

+/- 20 degrees

Question 7

Vertical stream range is___ above to_____Degrees above horizontal

Answer 7

10 above to 86 degrees above horizontal

Question 8

The blitz fire has a flow control handle that can be used to control the flow of water and act as a safety shut off feature. The handle is shut off when it is fully____. The handle is fully open with maximum water flow GPM when it is fully_____ Towards the monitors inlet

Answer 8

Shut off when it is fully forward. Fully open when it is pulled fully back

Question 9

The handle can be opened to any___detented flow positions

Answer 9

6

Question 10

Once the safety shut off valve is tripped, the flow control handle will automatically move to the fully close position. To resume operations with the monitor after the safety shut off has activated, do what?

Answer 10

Push the handle fully forward to ensure the safety shut off valve has been reset. Open the handle to restart water flow when it is safe to do so

Question 11

A minimum flow rate of____gpm Is required for proper isolating opera ration

Answer 11

175

Question 12

T/F

The oscillating feature can be used with the master stream five nozzle with a stack smoothbore tips

Answer 12

T

Question 13

The supply in light of the blitz fire model there is___ and it should be supplied with the one____

Answer 13

2 1/2”; one 2 1/2” supply line

Question 14

The blitz fire monitor is provided with a 2 1/2 inch dual pressure automatic fog nozzle. It can also be operated with solid stream stacked tips. What size solid stream stacked tips?

Answer 14

1 1/4” and 1 1/2” tips only

Question 15

The max force dual pressure automatic nozzle has a maximum flow capacity of___ gpm When supplied___ psi at the inlet

Answer 15

500 gpm; 175 psi

Question 16

The parent adjust from Street stream(rotated tip all the way to the right) to a ____ degree Wide fog as your rotate the tip back to the left. Rotation all the way to the____Opens the tip to flush debris without shutting down

Answer 16

120 degrees; to the left

Question 17

The fog tip May be switched between____ psi Standard mode and a low pressure mode of___ psi by twisting the knob on the front of the nozzle. Low pressure mode may be required when operating the monitor in areas where____ psi at the tip may not be possible. The pressure mode only affects the RPMs of the supplying engine, it does not affect GPM

Answer 17

100; 55; 100

Question 18

The____ solid stream tip will flow approximately____ gpm when supplied with___ psi At the monitors in let

Answer 18

1 1/4”; 490; 175

Question 19

The ___ solid stream tip wall flow approximately___ gpm once applied with___ psi At the monitors inlet

Answer 19

1 1/2”; 600 gpm; 175 psi

Question 20

The___ solid stream tip should not be used with the blitz fire monitor due to poor stream reach and stream break up

Answer 20

2 1/2”

Question 21

The safest method of restraining the blitz for model there is two?

Answer 21

Use the tiedown strap

Question 22

The blitz fire isolating monitor shall be visually inspected when

Answer 22

Weekly.

Question 23

If repairs are deemed necessary contacts who?

Answer 23

Fire tools and equipment at 718-391-9405. The out of service equipment shall be tagged with an RT 2