TOOLS 17 Multiversal

Question 1

The akron new yorker multiversal nozzle is a portable and fixed appliance. What is the max. pressure any part of this appliance should be subjected to?

Answer 1

200 PSI.

T.B. TOOLS 17 7.5

Question 2

The multiversal has a safety stop to maintain stability when used in the portable base. At what degree is the safety stop positioned and what must be done to go below the safety?

Answer 2

35 degrees.

The unit must be secured in either the truck mount or by securing with ropes as outlined in 3.3.4

Question 3

When securing the appliance with the rope procedure outlined at what point do you connect the hose lines?

Answer 3

After the appliance is secured.

Secure appliance 1st then connect hose

Question 4

The use of 2 hose lines to supply the multiversal is recommended. When 2 lines are used what should be done to the lines?

Answer 4

Bring the lines straight back 15’ from the siamese parallel to each other before making any sharp bends or turns. T.B.TOOLS-17 3.4.2

Question 5

What do you do if only 1 hoseline is used to supply?

Answer 5

Bring it straight back for 15’ before making any sharp bends or turns.

Question 6

When the multiversal is being operated can you move it or the 15’ of supply hose?

Answer 6

NO. It must be shut down prior to moving.

Question 7

The multiversal has a stacked tip. What are the sizes of the tips and what pressure should they operate at?

Answer 7

1 1/4”-100 PSI
1 1/2” - 70 PSI
2”- 50 PSI
T.B. TOOLS 17 3.4.5A