TLE DRAFTING

Question 1

May be done manually or with the use of computer-aided design software.

Answer 1

Drafting

Question 2

used to render sketches and lay out rough drawings.

Answer 2

Drawing Pencil

Question 3

What does the term H, B, and F mean?

Answer 3

H - hardness
B - blackness
F - fineness

Question 4

a type of pencil that holds graphite lead that can be dispensed or extended as its point wears out.

Answer 4

Mechanical Pencil

Question 5

a drawing instrument equipped with a refillable ink cartridge that produces lines of consistent thickness.

Answer 5

Technical Pen

Question 6

is a low-cost drawing paper used to transfer and copy drawings through tracing.

Answer 6

Tracing Paper

Question 7

is a type of drawing paper that is more durable and has better redraw quality. Known for its resistance to cracking and discoloration.

Answer 7

Vellum

Question 8

is a drawing material that has excellent archival quality. It is a durable medium that can withstand heavy revisions.

Answer 8

Polyester Film

Question 9

is a type of paper that provides grid marks used as a guide for sketching.

Answer 9

Grid Paper

Question 10

is a plain wooden board that has a flat surface and well-leveled edges

Answer 10

Drafting Board

Question 11

is a drawing furniture that usually comes with an adjustable set of legs and a tabletop.

Answer 11

Drafting Table

Question 12

used to draw straight horizontal lines. It also provides support for triangles when drawing vertical or angular lines.

Answer 12

T-square

Question 13

used to draw lines at a fixed angle, often used with the t-square to support its base. Comes in 30x60 and 45x45 angles.

Answer 13

Triangle

Question 14

is a drawing implement equipped with wires and wheel mechanism that support and maintain its horizontal alignment to the drafting table.

Answer 14

Parallel Straightedge

Question 15

used to draw arcs and circles.

Answer 15

Compass

Question 16

also known as French curve. Used to draw lines, arcs, and curves.

Answer 16

Irregular Curve

Question 17

is a thin sheet of material punched with various shapes of different sizes. Used to draw different shapes easily and quickly.

Answer 17

Template

Question 18

used to remove drawing errors and clean up dirt from the drawing paper.

Answer 18

Eraser

Question 19

is a small template-like tool used to cover the parts of the drawing when erasing nearby extents.

Answer 19

Eraser Shield

Question 20

is used to remove dirt and eraser residue without smudging the drawing on the paper.

Answer 20

Dusting Brush

Question 21

is a plastic, wood, or metal straightedge used to measure long or short distances.

Answer 21

Ruler

Question 22

is a long flexible steel measuring tape used to measure long distances.

Answer 22

Pull-push rule

Question 23

is a semicircular plastic sheet used to measure angles.

Answer 23

Protractor

Question 24

is a measuring tool used to convert dimension into bigger and smaller proportions.

Answer 24

Scale

Question 25

is used to transfer measurements and bisect lines into equal segments.

Answer 25

Divider

Question 26

is a adhesive used to set up the paper into drawing board

Answer 26

Masking Tape

Question 27

is used to shave pencil wooden coating and graphite lead for a finer point.

Answer 27

Pencil Sharpener

Question 28

Give AT LEAST 1 WAY on how to prepare and handle PENCILS.

Answer 28

1). Sharpen your wooden pencil with a quality sharpener.
2). Use soft cloth or tissue to clean the pencil to get rid of particles that may ruin your work.
3). Keep the pencil lead sharp and pointed when drawing.

Question 29

Give AT LEAST 1 WAY on how to prepare and handle COMPASSES AND DIVIDERS.

Answer 29

1). Prevent rusting the wiping the compass with a very thin film of oil.
2). Clean the adjustment and thumb screws often.
3). Sharpen the needle at all times.
4). Store in a dry place.

Question 30

Give AT LEAST 1 WAY on how to prepare and handle DRAFTING FURNITURE.

Answer 30

1). Avoid using the craft knife over the drafting table when cutting.
2). Keep the drafting furniture clean and dry at all times.
3). Refrain from putting heavy objects on your drafting table.

Question 31

Give AT LEAST 3 DEFECTS to look in for tools.

Answer 31

Chipped or nicked edges
Cracks
Warped surface
Faded or scratched hatch marks
Missing parts
Dull points
Blocking or Clogging
Rusting

Question 32

Give the full contents of an INSPECTION report.

Answer 32

Date, Item, Item Code, Description, Recommendations, Tools and Materials Custodian, and Reported By.

Question 33

Give the full contents of a BORROWERS slip.

Answer 33

Date, Control Number, Item, Quantity, Purpose, Date of Return, Borrower’s Name, Custodian, Borrower’s Signature.

Question 34

This indicates the list of tools and equipment to be borrowed from the depository.

Answer 34

Borrower’s Slip

Question 35

This indicates the things needed to be procured from an external vendor or seller.

Answer 35

PURCHASE REQUISITION SLIP

Question 36

This allows you to identify the tools and materials you need to request or acquire before starting a task.

Answer 36

TOOLS AND MATERIALS CHECKLIST

Question 37

This is where drafters record whatever drafting instruments they borrow and return to the depository.

Answer 37

BORROWER’S LOG

Question 38

This records the findings after examining a particular tool for damages and defects.

Answer 38

INSPECTION REPORT