Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

CARs > Test #2 > Flashcards

Test #2 Flashcards

1
Q

The 24-0043 application form for a C of A must be submitted within ____ days of the date on which the aircraft’s condition was certified.

A) 30 days
B) 60 days
C) 7 days
D) There is no restriction - as long as the aircraft is maintained in an airworthy condition

A

A) 30 days

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

An amendment to a Weight & Balance Report must be made:

A) Where there is a change of more than 2% in the empty weight of the aircraft
B) Following any changes to the empty weight or C of G of the aircraft
C) Following any change to the empty weight
D) Every 5 years

A

B) Following any changes to the empty weight or C of G of the aircraft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

When an aircraft is sold, the Certificate of Airworthiness:

A) Is revoked until such a time as the aircraft is re-certified pursuant to CAR 507
B) Becomes a temporary C of A, for the lesser of thirty days or C of A re-issue.
C) Is transferable with the aircraft, providing the aircraft remains a Canadian registered aircraft
D) None of the above is true

A

C) Is transferable with the aircraft, providing the aircraft remains a Canadian registered aircraft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

When the maintenance recommendations of an aircraft manufacturer differ from those of the engine manufacturer:

A) The maintenance recommendations of the manufacturer shall be used
B) The certifying authority must make a determination based on industry practices
C) The recommendations that provide the greatest margin of safety shall be used
D) The maintenance recommendations of the aircraft manufacturer shall be used

A

D) The maintenance recommendations of the aircraft manufacturer shall be used

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Aeronautical products include:

A) Aircraft
B) Aircraft engines
C) Aircraft appliances
D) All of the above

A

D) All of the above

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What must an AME do if an aircraft identification plate requires removal for the purposes of carrying out a repair?

A) Notify the Minister of the removal and re-attachment of the aircraft identification plate
B) Re-attach the aircraft identification plate as soon as practicable, but at least before the next flight
C) Obtain written authorization from the Minister before removing the aircraft identification plate
D) Re-attach the aircraft identification plate immediately after completion of the repair

A

D) Re-attach the aircraft identification plate immediately after completion of the repair

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

The statement - ‘ Any machine capable of deriving support in the atmosphere from reactions of the air, other than a machine designed to derive support in the atmosphere from reactions against the earth’s surface of air expelled from the machine, and includes a rocket,’ defines:

A) Hovercraft
B) Aeroplane
C) Aircraft
D) All of the above

A

C) Aircraft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

The height of the letters in the marks displayed on the heavier-than-air aircraft, that does not display marks under the wing or cabin shall be:

A) 11.8 inches
B) 20 cm
C) 15 cm
D) 19.68 inches

A

A) 11.8 inches

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

An amendment to an aircraft’s weight and balance report must be certified by:

A) The signing of a maintenance release by an appropriately rated AME
B) The aircraft owner, providing the aircraft is a private aircraft
C) By a person authorized to do so as an AIR pursuant to the MPM of a properly rated AMO
D) Re-weighing the aircraft, if it is a large aircraft

A

A) The signing of a maintenance release by an appropriately rated AME

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

An AME can exercise the privileges of the licence only when:

A) Maintenance certification is made through the MPM of an appropriately rated AMO
B) Recency requirements have been met as per AWM 566
C) The AME has performed aircraft maintenance for 3 months of the preceding 2 years
D) Both A and C are true

A

B) Recency requirements have been met as per AWM 566

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

CAR 202.69(1) - The Minister shall establish, maintain and publish a register of aircraft, to be know as the:

A) Canada Gazette
B) North American Aircraft Register
C) Consolidated Aircraft Register
D) Canadian Civil Aircraft Register

A

D) Canadian Civil Aircraft Register

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Notices to Aircraft Maintenance Engineers and Owners (NAMEOs) were replaced by

A) Service bulletins
B) SDRs
C) Service difficulty alerts
D) Airworthiness notices

A

D) Airworthiness notices

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Which part of CARs contains the standards for aircraft equipment and maintenance?

A) Appendix H, CAR 605
B) Appendix G, CAR 571
C) CAR 625
D) AWM Chapter 571

A

C) CAR 625

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What is the primary privilege of an AME?

A) To carry out annual inspections on Canadian and foreign registered aircraft
B) To certify out specialized maintenance for an Approved Maintenance Organization
C) To sign a maintenance release
D) To assume responsibility for the maintenance of an aircraft

A

C) To sign a maintenance release

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

The definition of “airworthy,” in respect of an aeronautical product is:

A) In a fit and safe state for flight, and in conformance with internationally recognized standards of airworthiness
B) in conformance with the applicable standards of airworthiness
C) No feature of the aeronautical product creates or may create a hazard to aviation
D) In a fit and safe state for flight, and in conformance with its type design

A

D) In a fit and safe state for flight, and in conformance with its type design

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Airworthiness limitation means:

A) A limitation in relation to an aeronautical product in the form of a life limit or a maintenance task that is mandatory as a condition of the type certificate
B) A limitation in relation to an aeronautical product in the form of operating restrictions
C) Operating limitations of an aircraft’s airframe, engines, or associated systems
D) Maximum published tolerances of an aircraft’s airframe, engines, or associated systems.

A

A) A limitation in relation to an aeronautical product in the form of a life limit or a maintenance task that is mandatory as a condition of the type certificate

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Standards for licensing AME’s are found in

A) AWM Chapter 565
B) CAR 403
C) AWM Chapter 566
D) CAR Part VI

A

C) AWM Chapter 566

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

How long must an applicant wait to attempt a rewrite after the first time failure of an AME exam?

A) 6 months
B) 2 weeks
C) 60 days
D) 30 days

A

D) 30 days

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Which of the following is considered specialized maintenance on non-pressurized aircraft skin or the skin of an aircraft float?

A) A repair to damage exceeding 6 inches, in any direction
B) Any repair requiring the installation of rivets
C) A repair to a skin that extends over a rib, former, or longeron
D) Any repair to a skin that requires the use of a support, jig, or fixture

A

D) Any repair to a skin that requires the use of a support, jig, or fixture

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

An AME licence is not considered current unless:

A) The license was issued in the preceding 24 months:
B) In the preceding 24 months, the holder has, for at least six months, supervised the performance of aircraft maintenance
C) In the preceding 24 months, the holder has, for at least 6 months, served as an aviation maintenance instructor
D) All of the above

A

D) All of the above

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

How many of the following are types of flight authority?

1) Transport Category
2) Certificate of Airworthiness
3) Specific Purpose Flight Permit
4) Commuter Category

A) One
B) Two
C) Three
D) All

A

B) Two

22
Q

An Interim Registration is issued when:

A) There is a change in legal custody and control of the aircraft, and the new owner of the aircraft intends to operate the aircraft in a commercial operation
B) A non-registered aircraft is imported to Canada from any country other than the United States
C) There is a change in legal custody and control and the new owner is qualified to be a Canadian owner
D) The documentation needed for a continuing registration cannot be immediately completed

A

C) There is a change in legal custody and control and the new owner is qualified to be a Canadian owner

23
Q

An ELT may only be tested:

A) During the first five minutes of any hour
B) After the first five minutes of any hour
C) In the facility appropriate to the testing of electronic warning devices
D) After notifying Transport Canada of the intent to test the ELT and arranging a suitable time

A

A) During the first five minutes of any hour

24
Q

A special C of A is a type of:

A) Registration
B) Flight permit
C) Type certificate
D) Flight authority

A

D) Flight authority

25
Q

The statement “a power-driven heavier-than-air aircraft that derives its lift from aerodynamic reactions on surfaces that remain fixed during flight,” defines:

A) A Helicopter
B) An aeroplane
C) A hovercraft
D) All of the above

A

B) An aeroplane

26
Q

A special C of A, provisional, is issued for:

A) The purposes of importing a non-registered aircraft into Canada
B) A damaged aircraft that is no longer in conformance with its type design, but is capable of safe flight
C) An aircraft used in a special purpose operation, such as fire suppression, aerial survey, or aerial application
D) An aircraft with a provisional type certificate

A

D) An aircraft with a provisional type certificate

27
Q

The maximum static leak rate for the altimeter of an un-pressurized aircraft is:

A) 50 ft/min
B) 150 ft/min
C) 100 ft/min
D) 200 ft/min

A

C) 100 ft/min

28
Q

The standards for the inspection and testing of altimeter systems are found in

A) Appendix C, CAR 605
B) Appendix B, AWM 571
C) Appendix D, CAR 625
D) Schedule II, CAR 571

A

B) Appendix B, AWM 571

29
Q

Which of the following aircraft must be maintained to the standards of Appendix C ‘Out of Phase Tasks’, of CAR 625?

A) Aircraft operated under CAR Part IV or CAR Part VII
B) Large, turbine-powered pressurized aircraft
C) State aircraft
D) All of the above

A

D) All of the above

30
Q

Which of the following is NOT a type certificate category?

A) Private
B) Transport
C) Utility
D) Manned free balloon

A

A) Private

31
Q

Tachometer calibration must be checked:

A) Every 24 months on turbine-powered aircraft operating under CAR Part IV or CAR Part VII
B) At least every annual inspection
C) Every 24 months
D)At least annually on every piston or turbine engine driving a variable pitch propeller or rotor

A

B) At least every annual inspection

32
Q

A damaged aircraft which no longer conforms to its type design, but id capable of safe flight, would require which type of flight authority?

A) Specific purpose flight permit issued pursuant to CAR 507
B) Special C of A - restricted issued pursuant to CAR 507
C) Special C of A - provisional issued pursuant to CAR 507
D) No flight authority can be issued until repairs are complete and certified under CAR 571.10

A

A) Specific purpose flight permit issued pursuant to CAR 507

33
Q

An aircraft modified for aerial survey would most likely be issued which type of flight authority?

A) A Special C of A provisional, providing the aircraft met the original conditions of issuance for the type certificate
B) Special C of A restricted
C) Specific purpose flight permit issued pursuant to CAR 507
D) Interim C of A issued pursuant to CAR 507

A

B) Special C of A restricted

34
Q

Following certification for condition and conformity of an aircraft by an AME for an export C of A the aircraft must:

A) Be properly configured for its intended use
B) Exported within 30 days of certification
C) The aircraft must be de-registered, and the Minister notified of the sale within 7 days
D) The aircraft must be maintained in the certified condition throughout the exportation process

A

D) The aircraft must be maintained in the certified condition throughout the exportation process

35
Q

The person responsible for maintenance for an aircraft category AMO must:

A) Hold an AME licence with ratings applicable to the AMO category
B) Have at least 6 years experience in aircraft maintenance
C) Be the holder of an appropriately rated AME licence and successfully complete a CARs exam on maintenance management
D) Appoint a director of maintenance, a production manger, and a quality assurance manager

A

B) Have at least 6 years experience in aircraft maintenance

36
Q

Which of the following may be used as a source of approved data for a major modification or major repair?

A) A repair design authorized by the holder of an aircraft certification authority
B) Applicable information in the FAA Advisory Circulars AC 43.13-1 and AC 43.13-2
C) Manufacturer’s Structural Repair Manuals;
D) None of the above

A

D) None of the above

37
Q

A used part does not require a maintenance release if:

A) An AME inspects it for condition and conformity
B) The part is removed from an airworthy aircraft, and subjected to an inspection for condition and conformity
C) A used part must have a maintenance release in all cases
D) It is an airworthy part removed from an aircraft and installed on another aircraft with no intervening storage period

A

D) It is an airworthy part removed from an aircraft and installed on another aircraft with no intervening storage period

38
Q

Which AMO program consists of provisions for sampling maintenance processes to evaluate the AMO’s ability to perform its maintenance in a safe manner?

A) Evaluation program
B) Quality program
C) Technical dispatch program
D) Quality assurance program

A

D) Quality assurance program

39
Q

A Certificate of Airworthiness must be renewed:

A) Annually
B) On the anniversary of the C of A, or, on another date agreed upon beforehand with the Minister
C) Remains in force indefinitely, unless suspended, surrendered, or cancelled
D) Every five years

A

C) Remains in force indefinitely, unless suspended, surrendered, or cancelled

40
Q

Which is ‘not’ considered specialized work?

A) Repair by riveting of an aircraft float keel
B) Swaging a control cable
C) Repair of a control-system bell crank
D) Repair by riveting of a fuselage longeron

A

B) Swaging a control cable

41
Q

Which of the following does not require a maintenance release?

A) Repairs to aeronautical products that are not major repairs
B) Elementary work performed on commercial aircraft
C) Aircraft scheduled inspections
D) All of the above require a maintenance release

A

B) Elementary work performed on commercial aircraft

42
Q

Which of the following are not used for the purpose of maintaining aeronautical products?

A) Flight time
B) Air time
C) Calendar time
D) Cycles

A

A) Flight time

43
Q

An aircraft operating under CAR Part VII is:

A) A commercial aircraft
B) A state aircraft
C) A flight training unit aircraft
D) All of the above

A

A) A commercial aircraft

44
Q

Generally, magnetic compasses must be re-calibrated:

A) Every 12 months
B) Every 24 months
C) Every 6 months
D) Every 12 months on IFR aircraft only

A

A) Every 12 months

45
Q

Before the coming into force of CARs, Type Certificated issued by Transport Canada were Called:

A) Type Designs
B) Supplemental Type Certificates
C) Type Approvals
D) Approved Type Designs

A

C) Type Approvals

46
Q

When a life limited part has reached the time in service authorized by its type design:

A) The part must be overhauled by an approved facility before it is returned to service
B) The aircraft owner must apply to Transport Canada for a service life extension
C) An appropriately rate AME may overhaul the part and sign a maintenance release certifying the overhaul
D) The part shall be rendered unusable, or identified as not airworthy and kept segregated from airworthy parts.

A

D) The part shall be rendered unusable, or identified as not airworthy and kept segregated from airworthy parts.

47
Q

A person employed by an AMO may sign a maintenance release for on-aircraft maintenance work:

A) Provided the person is authorized to do so in the MPM of the AMO
B) Provided the person is an appropriately rated AME and is the holder of an ACA issued by the AMO
C) Provided the person holds an appropriately rated AME licence
D) Provided the person holds an appropriately rated AME licence and is the holder of an SCA authorizing the person to certify the maintenance under CAR 573

A

B) Provided the person is an appropriately rated AME and is the holder of an ACA issued by the AMO

48
Q

ELT testing must be limited to a duration of no more than:

A) Ten seconds
B) One second
C) Five seconds
D) Five minutes

A

C) Five seconds

49
Q

Amendments to an AMO’s MPM must be incorporated within:

A) 30 days after approval
B) 60 days after approval
C) Immediately
D) As soon as practicable, but at least prior to any maintenance being performed

A

A) 30 days after approval

50
Q

The holder on any Canadian aviation document must produce it on demand to:

A) A peace officer, immigration officer, or public notary
B) A peace officer, the Minister, or an immigration officer
C) The RCMP or a representative of the Minister
D) Only to the Minister

A

B) A peace officer, the Minister, or an immigration officer

CARs (5 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions