Take Off procedures

Question 1

What is the normal take off procedure ?

Answer 1

1. Apply power 1500 RPM ( check and call all gauges in green)
   2.Full power, check speed and call :
   MAX POWER SET
   FUEL FLOW ALIVE
   AIRSPEED ALIVE
   VMC (at 80 MPH )
   Vr ( at 85 MPH )
2. Vyse then Vy and then execute and call :
   POSITIVE RATE OF CLIMB = GEAR UP
3. Check and call : GEAR UP and LOCKED
4. 400 ft AAE, call CLIMB POWER reduce to 26 ‘‘Hg / 2400 RPM
5. 1000 ft AGL = After take off checklist

Question 2

What is the reject take off procedure ?

Answer 2

In case of :

• Engine roughness on take off roll
• Loss of aircraft control on take off roll
• Door ajar light ON
• Airspeed/ Fuel abnormal indication
• Runway incursion, traffic on the runway
• >
  1. Control the aircraft, Power Idle, Apply brakes
  2. Advise ATC as soon as practicable
  3. Stop on the runway or exit on the taxiway
  4. Evacuate if necessary