T-26 Hydra Ram

Question 1

The Hydra Ram is a hydraulically operated forcible entry tool. It requires no priming and
will extend to ???
There are no hoses attached to it. The tool weighs 12 pounds
and is 13 inches long, has an adjustable shoulder strap, and a storage case.

Answer 1

¾ of an inch per stroke to a maximum opening of 4 inches. The maximum
force is 10,000 pounds.
Sec 1

Question 2

The hydra ram can be used on outward opening doors ? What about on a vehicle ?

Answer 2

YES and YES!!
Its main purpose is for forcible entry of outward and inward opening doors. Other
applications can be to provide an opening from the side of a vehicle hood or trunk for
placement of an extinguishing agent.
Sec 2.2

Question 3

Can the hydra ram be used underwater ?

Answer 3

Yep!!
The Hydra Ram can be used under water.
Sec 2.3

Question 4

When the operation is completed, bleed the system by placing the operating arm in the
down position, attach the retaining “O” ring and depress the pressure relief valve
until the working piston is totally retracted. If the piston does not retract can pressure be applied ?

Answer 4

YEA why not !!
If the working piston
does not retract by itself apply steady pressure. As soon as possible clean and lubricate
the working piston so that it will retract on its own.
Sec 3.4

Question 5

How often is oil added to the Hydra Ram ?

Answer 5

Never !
The Ram requires no replenishment
of fluids.
Sec 5.1

Question 6

After each use the tool should be inspected for

Answer 6

damage, tested for leaks, cleaned and
lubricated
Sec 5.2

Question 7

Both the piston under the operating arm and the working end

piston should be lubricated with

Answer 7

“3 In 1” oil
purchased through fire house expense account
Sec 5.2.2

Question 8

How is the Hydra Ram tested for leaks ?

Answer 8

After fully extending the working piston, the operating arm
should not be able to move except for when the relief valve is depressed.
Sec 5.2.1