SY1109

Question 1

What 3 things does the AAP panel turn on?

Answer 1

TCAS, MDP, EGI

Question 2

If the AAP MDP switch is not on what 2 things do you lose?

Answer 2

HUD and UFCP

Question 3

What does the EGI do when the AAP switch is activated?

Answer 3

Goes into alignment mode

Question 4

What does the AAP NORM mode switch do?

Answer 4

Allows UHF, VHF, and NAV systems to be controlled by the UFCP

Question 5

If the AAP mode switch is in BOTH, what does this do?

Answer 5

UHF and NAV controlled by backups, VHF controlled by UFCP

Question 6

Is there a backup VHF radio?

Answer 6

no

Question 7

What happens to VHF tuning capabilites if the MDP/UFCP fails?

Answer 7

VHF radio remains tuned to last frequency

Question 8

How do you activate the program mode on the backup UHF?

Answer 8

Press and hold channel button for more than 3 seconds

Question 9

What does the MODE button on the backup UHF allow you to do?

Answer 9

Toggle between MN (send/receive) and GD (send/receive UHF and Guard)

Question 10

Pressing the center button less than 2 seconds on the Nav backup does what?

Answer 10

Swaps primary and standby frequencies

Question 11

Pressing and holding the NAV button more than 5 seconds does what?

Answer 11

Blanks the standby frequency

Question 12

What happens if the rear seat selects HOT mic?

Answer 12

Overrides front seat and makes both cockpits hot mic

Question 13

Can you transmit from both cockpits simultaneously on different radios?

Answer 13

yes

Question 14

Which cockpit has priority if both PTT switches are pressed?

Answer 14

rear

Question 15

What does the default display switch on the stick do?

Answer 15

toggles between the PFR and HSD on the MFD

Question 16

What does the NWS button do in the air (weight off wheels)

Answer 16

Toggles between the primary navigation source (PNS), ex. EGI, VOR, etc.

Question 17

What is the airspeed range on the standby airspeed indicator?

Answer 17

60-850 KIAS

Question 18

What are the increments from 60 to 200 knots and above 200 knots for the standby airspeed indicator?

Answer 18

10-knot, 50-knot

Question 19

The standby attitude indicator is unreliable until what happens?

Answer 19

1 minute passes and the off flag disappears

Question 20

What does the “T” button on the EED do?

Answer 20

Initiates the display test

Question 21

What does the “C” button on the EED do?

Answer 21

Displays the chronometer and starts it running

Question 22

What does the “M” button on the EED do?

Answer 22

Toggles EED between “master” and “slave”

Question 23

When does the fuel quantity bar turn red?

Answer 23

When fuel drops below 250 lbs

Question 24

when is the fuel imbalance reading white?

Answer 24

From 60 to 190 lbs

Question 25

When is the fuel imbalance reading red?

Answer 25

At 200 lbs and higher

Question 26

What causes the "EED HOT" message to be displayed?

Answer 26

Temp exceeds 85* C for 40 seconds

Question 27

What determines which EED is the master vs. slave

Answer 27

The first EED turned on operates as the master

Question 28

How can you get EED data if fails?

Answer 28

Display it on the MFD

Question 29

If the VTR is in CMB mode what happens?

Answer 29

VTR records both HUD and front MFD by time-sharing . 6 seconds of HUD to 0.6 of MFD

Question 30

How will VTR start/stop be accomplished in UPT?

Answer 30

Manually started

Question 31

How many different flight plans can a DTC carry?

Answer 31

Up to 10

Question 32

How many editable and total waypoints can a flightplan have?

Answer 32

15/70

Question 33

How many destination points can a DTC carry?

Answer 33

149

Question 34

How many ICAO points can a DTC carry?

Answer 34

80,000

Question 35

How many approach pattern data can a DTC carry?

Answer 35

10

Question 36

Can you transmit from both cockpits simultaneously on different radios?

Answer 36

40 UHF/40 VHF

Question 37

How many area parameters can a DTC carry?

Answer 37

10 (40 pts per area)

Question 38

How many area no-fly zones can a DTC carry?

Answer 38

10 (red circle)

Question 39

How is DTC data loaded to the MDP?

Answer 39

Via DTS menu selection on the MFD

Question 40

When does MDP data recording normally start and stop?

Answer 40

Starts at MDP power-up and stops at CAS less than 60

Question 41

ACMI files interface with mission debrief station (MDS) to do what?

Answer 41

Stream INS data to show you a graphical depiction of the flight

Question 42

How many seconds does EGI storage and memory require after EGI switch is turned off on the AAP?

Answer 42

10 seconds