SY1107 UFCP Flashcards
T/F The UFCP is inoperative if the MDP fails or is off
true
“What does the ↓ ( down arrow) symbol indicate when it is displayed next toe a window item?
A) The function/setting is active or selected
B) A menu page is below the current level which can be accessed by pressing the adjacent OSB
C) The selected item is toggled or cycled between options or settings by pressing the adjacent OSB
D) The item is displayed in the window below can be selected by pressing the adjacent OSB”
B
T/F The U BRT rocker switch on the UFCP controls the brightness of the panel window displays, LED, OSBs and all the function and control keys
F) The U BRT controls the brightness of the display. The brightness of the buttons and keys are controlled vis the lighting control panel on the right console
“In which of the following cases must the ENT key on the UFCP be pressed to complete the data entry?
A) After the last character is entered filling a fixed length field
B) After the last character is entered filling a non-fixed length field
C) After the last character is entered and less than the entire non-fixed length field is filled
D) After the last character is entered in all cases regardless of the number of characters or type of field”
C) The ENT key is pressed when less than all the characters are entered in a no-fixed length field
“What is the indication that you have entered invalid data on the UFCP
A) The invalid data display flashes
B) The data display will change to all dashes in the field
C) The last vaild data will reappear and flash
D) The data will be erased from the window and the display will be blank”
A) The data reappears if it is valid. If invalid, it flashes
"If a typing error is made on the UFCP before all of the data has been entered, pressing \_\_\_ will clear the field and display dashes again for reentry of the correct data A) The RTN key B) The ENT key C) any function key D) The adjacent OSB"
D) Pressing the OSB key clears the present data characters in the window for data entry
“Which of the following methods can be used to return from a function display’s primary page to the basic display
A) Press the RTN key
B) Press the current function key again
C) Wait appoximately 20 seconds, and return will be automatic from all function displays if no other inputs are made
D) Both A and B”
D
T/F The function displays are manually selected by pressing the applicable function key and are enabled regardless of the current display or operating stage
True
"The normal ATC transpoder code is set or changed on the A) EGI function display B) the SET function sidplay C) the IFF function display D) the FPL function display"
C) The IFF page contols various TCAS parameters and IFF codes
T/F The MDP is powered fown and back up during a flight due to an electrical malfunction, the current (barometric pressure) altimete setting will need to be reentered if it is other than the default setting of 29.92
F) MDP/UFCP power on default for Squawk is last selected
T/F Crewmembers can independently control the UFCP
True
T/F Any inputs or changes made by a crewmember are reflected on both UFCPs
True
What does the ~ symbol mean
the item can be cycled between options
What does thte * symbol mean
The currnet item is active
What does the diamond symbol mean
item can be changed using the inc/dec
The DCL button (also the 0) declutters what?
HUD
Hotkey G does what
turns off reception of G on UHF for 1 minute
Hotkey N does what
opens the nearest airfield page on the MFD in that cockpit
Hotkey P does what
opens the Flight Plan P(scratch pad) page on the MFD to view the terminal procedures available for the selection
Hotkey Q does what
toggles between QNE and QNH
Hotkey R does what
selects MFD repeater mode for that cockpit
Hotkey T does what
allows quick access to the Target Destination page to update a DEST point’s coordinates
Hotkeys U and V do what
toggle squelch for UHF or VHF
Hotkeys A through F do what
select different weapons programs
Functions in the ALT page
Change Altimeter settings and alarms
Functions in the SET page
Change the HDG, CRS, speed bugs and Bingo fuel
Functions in the VTR page
Operation of the VDTS system
Functions of the WIT button
leaves a marker in the video record and resets chronometer
Functions of the ACK button
removes all warning displays and silences warning tones. Does not affect gear warning
Functions in the CLK page
controls TOD and chronometer function
Functions in the Bullseye page
Sets bullseye point and toggles bullseye display
Function of IDT button
Idents for 15sec
Functions in the FPL page
Edit flight plans including add/del points and editing TOT times and FBY/OVR
Function of MRK button
double tap to store current flyover point as DST 605-610
Functions of DST page
display and edit Destinations and selection of divert mode
Functions of APP page
review approaches stored in MDP
Functions of COM page
control of UHF/VHF parameters
Functions of the EGI page
Edit EGI parameters and turn on/off radar alt
Functions of the IFF page
edits TCAS and IFF functions
Functions of the WPN page
display and entry of A/G weapon delivery
T/F pressing the TST button will not interrupt normal system operation
True
T/F When filling a the last character in an input field the ENT key must be hit
False
What happens when you press an inop OSB
nothing
when entering data what is the display if the data is valid vs invalid
valid - data appears accordingly, invalid - flashes and reverts back to last valid data
What happens when you use the inc/dec function on a manual frequency
switches to the last used
items displayed on the basic page
PNS, current steer point, frequency of current PNS, current frequency of UHF and VHF
T/F you must exit a function page back to the basic page before entering another function page
False
T/F The MDP is capable of maintain pre-entered data during brief electrical power interruptions such as engine start
True
T/F The MDP will operate through all generator crossovers
False
