Set Up Room

Question 1

Steps to set up a scope mission bay

Answer 1

Paper on the computer station
Cap and red wrap on table
Check water container
Unwrap scope and place valves
Plug in scope and close lever
Get new tubing and suction canister for Neptune
Attach scope to suction/Neptune and air/water channel and if needed, back channel.
Press light and suction and check white balance
Turn light off and check suction with water container
Then check air
Then check side water (cleans the lens)
Then if a back channel is present, press the foot pump to release straight water jet

Question 2

Restocking

Answer 2

1 bin= chloraprep single swab, band aids, individually wrapped 2x2 gauze, scissors

2 bin= bandage tape 1” and 3” roll, 2 fluid path adapters, 4 lever lock cannulas.

Nasal airway set: 34f, 32f, 30f, 28f
Girdle soft airway set: 100mm red, 90mm yellow, 80mm green.

Triflow suction cath-n-glove: 10f and 14fr.

2 oxygen mask with extension tubing set.

2 respiratory manual breathers.