Sensit HXG-3

Question 1

What is the Sensit HXG-3?

Answer 1

Combustible gas detector

Question 2

What does the Sensit HXG-3 detect?

Answer 2

Methane/Nat gas, pentane, propane

Question 3

How does the sensit HXG-3 detect?

Answer 3

Advanced low power semi conductor sensor

no vacuum pump/passive

Question 4

What type of batteries does the sensit HXG-3 have

Answer 4

3”c” batteries that lasts for up to 25 hrs of continuous use. when batt low is displayed you have 5 min till shut down

Question 5

What limits/ parameters does the sensit HXG-3 have?

Answer 5

measurements are in .1% lel increments. PPM is shown in 1 or 10ppm increments.
Leak-1-10ppm Range 0-50,000 ppm +/- 10%
LEL-0.1% Range 0-100% +/- 10%

Question 6

Obscure stuff Sensit HXG-3

Answer 6

Audible and visual alarm will go off at preset 50% LEL (2.5% meth)(.75% pent.)

Question 7

Obscure stuff Sensit HXG-3

Answer 7

Meters can be bump tested! B+C buttons take you to the menu.

Question 8

Obscure stuff Sensit HXG-3

Answer 8

Gasses can be switched from methane to pentane using B+C buttons

Question 9

Obscure stuff Sensit HXG-3

Answer 9

LEDs will light up when preset alarm point is reached!
Amber/ low    5-9.9%
Red/ Haz1 10-24.9%
Red/Haz2  25-49.9%
Red/Haz3 50-100%

Question 10

Obscure stuff Sensit HXG-3

Answer 10

You can save 6 events preset from factory.

Question 11

Obscure stuff Sensit HXG-3

Answer 11

You can fine tune the “tick”! Set 1 sec tick rate. once leak is detected tick will be a solid tone. turn wheel clockwise to slow down tick rate to increase sensitivity to leak to find leak.

Question 12

Obscure stuff Sensit HXG-3

Answer 12

It has an infrared receptor to handle communication with calibration station