Section T CAN/ULC-S536-04 Flashcards
T-1.
(CAN/ULC-S536-04 – Appendix B)
Appendix B of CAN/ULC-S536-04, refers to:
a) Fire alarm testing/inspection procedures for qualified persons
b) Ontario Building Code excerpts associated with CAN/ULC-S536-04
c) The responsibilities of the authority having jurisdiction noted in the standard.
d) Alternate measures for occupant fire safety
d) Alternate measures for occupant fire safety
T-2.
(CAN/ULC-S536-04, Section 4.1)
In accordance with CAN/ULC-S536-04, which of the following inspections are to be conducted daily?
a) Status of the primary and remote trouble signal indicators
b) Status of the battery backup
c) Status of pull stations
d) Status of end of the line resistors
a) Status of the primary and remote trouble signal indicators
T-3.
(CAN/ULC-S536-04, Section 4.2)
In accordance with CAN/ULC-S536-04, batteries are to be inspected for:
a) Clean terminals which are lubricated
b) Secure terminal clamps
c) Electrolyte level and specific gravity are as specified by the manufacturer
d) All of the above
d) All of the above
T-4.
(CAN/ULC-S536-04, Subsection 5.1.7)
In accordance with CAN/ULC-S536-04, a copy of the inspection and test report shall be:
a) Given to the local fire department
b) Given to the owner
c) Posted in a visible location by the remote annunciator panel
d) Posted in a visible location near the main control panel
b) Given to the owner
T-5.
(CAN/ULC-S536-04, Subsection 5.3.1)
In accordance with CAN/ULC-S536-04, each control unit is to be inspected for the following:
a) Fused in accordance with manufacturer’s marked rating of the system
b) Charging current
c) Physical damage
d) Adequate ventilation
a) Fused in accordance with manufacturer’s marked rating of the system
T-6. (CAN/ULC-S536-04, Article 5.7.1.3) In accordance with CAN/ULC-S536-04, all shall be tested on a yearly basis except in the event that access cannot be reasonably made for safety considerations. a) Batteries b) Protective dust shields c) Transponders d) Field devices
d) Field devices
