SCBA Fast Pak ADD 1

Question 1

What type of handle does a
LOW pressure side have?
What color is it?
Picture

Answer 1

Ball handle cover
The actual handle is black and the cover is orange with black writing with a yellow reflective strip

Question 2

What type of handle does the
high-pressure side have?
What color is the cover?

Answer 2

T handle cover
Black with yellow reflective stripe

Question 3

Fast pak, the low pressure side of the bag that has the ball handle. Contains a non-CBR regulator and AV 2000 face piece and a nose cup. How long is the low pressure hose?

Answer 3

6ft
PS has dual manifold (Hansen Fittings)
2.2

Question 4

Fast Pak, the high-pressure side of the bag has a T handle cover and contains 4500 psi Scott air cylinder. How many minutes of use will you get with the cylinder? Right angle valve and how long is a high-pressure hose with universal coupling? 2.3

Answer 4

15 minutes
5 ft long hose
Remember Low Pressure hose is 6ft.

Question 5

T/F Fast pak,is there a remote pressure gauge with a high air whistle assembly?
2.5

Answer 5

False
Low Air Whistle

Question 6

T/F Fast Pak, both the high-pressure and low pressure systems can be operated simultaneously 3.4

Answer 6

True

Question 7

What is the fast pak not equipped with?
What are the two things it is equipped with?
4.1

Answer 7

Vibra- alert and HUD.
Remote gauge and low air whistle which indicates when the cylinder has 1/4 of his full capacity remaining

Question 8

Fast pak, it is essential that one member of the fast unit who has ——— ————with the extrication team, is assigned to monitor the actual volume of air remaining in the portable cylinder.

Answer 8

Audible Communication
4.2

Question 9

T/F when a fast pak is in use the fast unit safety team shall acquire an additional fast pak from another unit on scene

Answer 9

True
4.5

Question 10

Fast pak listen for the ———activation when the bottle is turned on when bleeding out the system?

Answer 10

Low air whistle
5.10

Question 11

Fast Pak low pressure hose is —-ft in length. Attached the hose is a —- —- EZ flow regulator without a ——-and it’s got a Scott AV 2000 facepiece with a nosecup. 8.1

Answer 11

6ft
Non-CBRN
Vibra-Alert

Question 12

T/F
Fast pak, during high-pressure operations one member of the Fast team must monitor the air supply and ensure the facepiece is providing air to the down member.

Answer 12

False
Low pressure operations
8.3

Question 13

Fast pak, three ways to monitor the volume of air remaining in the cylinder. What are they?
8.3.1

Answer 13

Check remote Gauge
Listen for Low Air Whistle
(activates at 1/4 remaining)
Check cylinder gauge.

Question 14

Fast pak, low pressure hoseline may be used in one of the following three ways. What are they?
8.5.1

Answer 14

Swap out REGULATORS
Disconnect members HANSEN connection and connect to fast pak Hansen fitting.
Replace members FACEPIECE.
Regulators-Hansen-Facepiece

Question 15

Fast Pak, if the member is unable to activate the inhalation valve, turn the red purge valve ——-, away from the members face to achieve a sufficient flow, and ensure the purge valve remains ——-.

Answer 15

Downward
Open
8.6.3

Question 16

Fast Pak, disconnect the Hansen fitting on the members low pressure hose ——- their regulator. ——— the male coupling in FIRST then pull back the sleeve to disengage a coupling.

Answer 16

Below
Push
8.7.1

Question 17

T/F Fast pak, if the cylinder and or valve assembly of the distressed member show damage or evidence of exposure to medium or high heat or flame. A decision must be made whether that UAC is suitable for recharging.

Answer 17

The word medium heat is not mentioned 9.2

Question 18

Fast Pak the —— foot high-pressure hose will administer air to a members SCBA via the UAC this will equalize both air cylinders in approximately —— seconds. 9.4.1

Answer 18

5ft
60 seconds

Question 19

Fast Pak, when removing member from IDLH, the ——pressure UAC coupling must be removed. Severing the ———pressure hose during removal will deplete all the air from the system. The remaining air in the fast pack can also be used to equalize the members SCBA again if needed or another member in need of air. 9.7.6

Answer 19

High
High

Question 20

Fast Pak if the UAC on the members SCBA is damaged, do not attempt to connect the high pressure UAC airline assembly from the fast pak use one of the other high-pressure methods. 10.5

Answer 20

False
Use one of the low-pressure methods

Question 21

Fast Pak, if the ——- on the UAC of the members SCBA is missing quickly examine and remove any visible debris before connecting into the UAC. If the UAC is impacted and or blocked with debris, use one of the low pressure methods. 10.6

Answer 21

Dust Cap

Question 22

T/F Fast pak, if at anytime during the filling process, a leak is detected immediately discontinue the filling procedure and supply air via one of the low pressure methods 10.7

Answer 22

True

Question 23

T/F Fast Pak, can be augmented with air in three of the following ways
1-utilizing another fast pak
2-utilizing an additional mask
3-SOC units use an air cart 200 foot hose

Answer 23

True
Read this section too much info to put on card. Section 11 page10

Question 24

Can the Fast Pak assigned to the fast Unit be used on non-FDNY members
12.2

Answer 24

No
Not the Fast Pak assigned to the Fast Unit

Question 25

The designated Fast unit shall always bring their ——— to the incident command post 13.1

Answer 25

Fast Pak

Question 26

T/F When use of the Fast Pak is anticipated it is recommended the member assigned to monitor the air turn on the cylinder when arriving at the location of the member in distress. 13.4

Answer 26

True (This is new) *** Turn on cylinder when arriving at distressed member.

Question 27

Fast Pak NEW Material What is the fastest method? What is the slowest method? 13.7

Answer 27

This is the actual order! Replace the regulator fastest. Replace Hansen Replace Facepiece Utilize the high pressure equalization method is the slowest.