Safety

Question 1

_______ may be used as a solvent on board cutters

Answer 1

Diesel fuel

Question 2

These solvents are available that may be considered as alternatives to diesel fuel for cleaning and degreasing operations

Answer 2

PD-680, Type II (flashpoint 140 deg F) and Biotect “Hi-Solv” (flashpoint 200 deg F).

Question 3

_______is not authorized to be used as a cleaning solvent or as a substitute for lighter fluid.

Answer 3

Gasoline

Question 4

NSTM Chapters _____ and____ contain guidance on the handling and stowage of gasoline.

Answer 4

542 and 670

Question 5

A _____ is defined as 400 degrees F (205 C) and higher, if the piped liquid is fuel oil.

Answer 5

hot surface

Question 6

A hot surface is defined as 650 degrees F (343 C) and higher, if the piped liquid is __________ or __________.

Answer 6

lubricating or hydraulic oil.

Question 7

NSTM Chapter 635 provides additional guidance on _______ insulation and protective covers

Answer 7

piping

Question 8

Protective covers and shields shall be placed on piping flanges, _____, and strainers that contain flammable fluids and are subject to pump discharge pressure or a positive static head.

Answer 8

filters

Question 9

Protective______ are used to direct fluid spray away from watchstanders, hot surfaces and running equipment.

Answer 9

shields

Question 10

Flammable is defined by Merriam-Webster’s Dictionary as “capable of being ________ and of burning quickly.”

Answer 10

easily ignited

Question 11

Portable fuel oil tanks/containers shall be ________ inspected semi-annually

Answer 11

visually

Question 12

Every 2 years, installed _______ shall be cleaned, flushed, and inspected

Answer 12

Fuel tanks