Reliability Program Tech OPS Flashcards
What does RCB/FRG stand for?
Reliability Control Board/Fleet Reliability Group
What is an AD- HOc?
It is a data mining request, usually from leaders.
What is an Ad-Hoc Request
A data mining request, usually from a leader.
GVI
General Visual Inspection
What is the MPM 15 program?
The reliability program.
What is ARI rank?
Aircraft reliability Rank the higher the number the least of concern it is. If it is, for example rank 1 or 2 it is of extreme concern and a ARI rank of 100 by contrast is of least concern in regards to reliability.
What does FEC stand for?
Failure Effect Category
What is a Zonal on an Aircraft?
Breaking down an aircraft into sections for easier maintenance is called aircraft zonal.
What is ETOPS
This is extended range operations of an aircraft away from 60 minutes flight time from a suitable airport. The ETOPS extended levels are 120 and 180 minutes.
What does NON-HMV NRC’s stand for?
Non-Heavy Maintenance Findings(NRC=NON Routine Cards )
CODING: When can you use Restored on corrective action?
REstored is for FOM on corrective action/maintenance action.
What are discrepancies called that are generated by pilot?
Pirep, PDIS( pilot squaks)
What does NRC stand for
Non-Routine Cards : NON-Routines, findings during scheduled maintenance.
HMV
=Heavy Maintenance Visit
What is the MPM section related to the reliability program?
MPM 15
What does MPD stand for? and what is it?
MPD is a Boeing Document, Maintenance Planning Document*
MRB(R)
MRB(R)Maintenance Review board(record)
is controlled by Boeing, approved document, operator, FAA, Boeing signatures.
FH
FLight Hours
FC
Flight Cycles
DY
days
APUH
Auxiliary Power Unit Hours
MO
Months
YR
Years
Ven Rec
Vendor Received
Eng Cng
Engine Change
Note to Programs Development (Maintenance Packaging Team)
Refer to the ________ _________ to see how the
Performance Analysis Team will prioritize each
audit that is submitted.
Priority Matrix
What does benchmarking mean?
Sharing information with other airlines
What is the advisory circular that drives reliability and analysis?
AC120.17.B
ORION
ARI Ranks
What is the check analysis database.
Application that captures heavy maintenance and line maintenance data onto a database to be cleaned and analyzed.
what are non-routine faults?
faults found during regular Maintenace tasks or checks that arised as a result of said task or inspection.
RCM
reliability centered Maintenance.
MPIG
Maintenance programs industry group( this group reviews and updates MSG-3 methodologies. MSG-3 is owned by ATA.
IMRBPB
IMRBPB (board that approves MSG-3 methods)
